capes. The Cape class was replaced by the 110-foot (34 m) Island class beginning in the late 1980s and many of the decommissioned cutters were transferred...

Yard discontinued building the 95-foot Cape-class cutter to have the capacity to produce the 82-foot Point-class patrol boat in 1960. They served as patrol...

capabilities, the Island class, all named after U.S. islands, replaced the older 95 feet (29 metres) Cape-class cutters. These cutters are equipped with advanced...

The List of United States Coast Guard Cutters is a listing of all cutters to have been commissioned by the United States Coast Guard during the history...

The Sentinel-class cutter, also known as the Fast Response Cutter or FRC due to its program name, is part of the United States Coast Guard's Deepwater...

Apalachee-class harbor tug (WYTM) 110' Manitou-class harbor tug (WYTM) 95' Cape-class cutter (WPB) 82' Point-class cutter (WPB) List of equipment of the United...

multiple classes of vessels known as Cape class: Cape-class cutter, 95-foot cutters built for the United States Coast Guard circa 1950 Cape-class maintenance...

USCGC Cape Shoalwater was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a...

USCGC Cape Henlopen was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law...

1959–1970. The design was based on the United States Coast Guard Cape-class cutter design with a five-foot (1.5 m) hull extension. It was specifically...

intentions to replace the eleven White-class and Red-class cutters still in service with the fourteen keeper-class ships. This saved maintenance expenses...

decommission the fleet, with eight Marine Protector cutters replaced by newer Sentinel class cutters. In May 2021, the United States announced that it would...

USCGC Cape Horn was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland, in 1958 for use as a law...

USCGC Cape Fox (WPB-95316) was a Type B Cape-class cutter of the United States Coast Guard. Built at the Coast Guard Yard in Curtis Bay, Baltimore the...

USCGC Cape Darby was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement...

United States Coast Guard (USCG) Cape-class cutter, named ROU 11 Río Negro, three former USCG Marine Protector-class patrol boat, named as ROU 14 Río...

Border Force Cutter) following the establishment of the Australian Border Force. On 13 December 2015, Austal announced that two more Cape-class vessels had...

Rio de Janeiro Navy Arsenal. Based on the United States Coast Guard Cape-class cutter design, they were built between 1970 and 1971 as coastal patrol vessels...

USCGC Cape Cross was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement...

Apalachee-class harbor tug (WYTM) 110' Manitou-class harbor tug (WYTM) 95' Cape-class cutter (WPB) 82' Point-class cutter (WPB) CG: all Coast Guard ships in the...

The Casco class was a large class of United States Coast Guard cutters in commission from the late 1940s through the late 1980s. They saw service as weather...

March 18, 2017. She is the second cutter of her class to be the homeported at the Coast Guard Training Center in Cape May, New Jersey, and also the second...

USCGC Cape Small was United States Coast Guard steel-hulled patrol boat of the 95-Foot or Cape class. She was stationed in Hilo, Hawaii from 1953 to 1987...

The Pawtuxet-class cutters were a class of six screw steam revenue cutters built for the United States Revenue Cutter Service during the American Civil...

capabilities, the Island class, all named after U.S. islands, replaced the older 95-foot Cape-class cutters. These cutters are equipped with advanced...

USCGC Cape Upright was United States Coast Guard steel-hulled patrol boat of the 95-Foot or Cape class. 1953: From here stationed at Norfolk, Virginia...

a United States Coast Guard Cape-class cutter This disambiguation page lists articles associated with the title Cape Fox. If an internal link led you...

The Polar Security Cutter Program is a program to recapitalize the United States Coast Guard's aging fleet of icebreakers, currently consisting of the...

engines. The Point-class cutter had only two main drive engines, but they were more consistent throughout the class than the Cape-class cutters, so it was easier...

was the United States Coast Guard's 23rd Sentinel-class cutter. She was the first cutter of her class stationed in the Coast Guard's Eight District, with...