Failure rate is the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the...

Annualized failure rate (AFR) gives the estimated probability that a device or component will fail during a full year of use. It is a relation between...

put on a quantitative basis when mathematical failure rate models are combined with a statistical failure mode ratio database. It was one of the first...

which a failure occurs Failure rate – Frequency with which an engineered system or component fails Governance failure Market failure – Concept in public...

failure prediction based on MTBF implies the total absence of systematic failures (i.e., a constant failure rate with only intrinsic, random failures)...

people worldwide. Overall, heart failure affects about 2% of adults, and more than 10% of those over the age of 70. Rates are predicted to increase. The...

or increased serum creatinine. Diagnosis of chronic failure is based on a glomerular filtration rate (GFR) of less than 15 or the need for renal replacement...

manufacturers typically specify a mean time between failures (MTBF) or an annualized failure rate (AFR) which are population statistics that can't predict...

October 14, 2010, to reduce the new test's unacceptably high failure rate. The failure rate on the citizenship test has been low until recently; in 2008...

use failure rate of 2–8%, while intrauterine devices (IUDs) have an actual use failure rate of 0.1–0.8%. Condoms have an actual use failure rate of 10–18%...

The bathtub curve is a particular shape of a failure rate graph. This graph is used in reliability engineering and deterioration modeling. The 'bathtub'...

action taken attempting to hold Microsoft responsible for the Xbox 360's failure rate and provide compensation for those affected. Three flashing red lights...

concept must be related to the dangerous failure rate of a system, not just its failure rate or the failure rate of a component part, such as the software...

Early failures or infant mortality failures, constant random failures and wear out failures. Failure types included in the total failure rate are short...

The capacitor plague was a problem related to a higher-than-expected failure rate of non-solid aluminium electrolytic capacitors between 1999 and 2007...

profile with specific fixed duration mission phases Sources for failure rate and failure mode data Fault detection coverage that system built-in test will...

first-year (or for LAM, first-6-month) failure rates of less than 1%. With typical use, first-year failure rates are considerably higher, at 9%, due to...

toxic environment for sperm and eggs, thus preventing pregnancy. The failure rate of a copper IUD is approximately 0.8% and can prevent pregnancy for up...

drive does not relate to the drive's failure rate. A 2011 summary of research, into SSD and magnetic disk failure patterns by Tom's Hardware summarized...

Failure modes, effects, and diagnostic analysis (FMEDA) is a systematic analysis technique to obtain subsystem / device level failure rates, failure modes...

areas: early failures or infant mortality failures, constant random failures and wear out failures. Failures totalized in a failure rate are short circuit...

areas: early failures or infant mortality failures, constant random failures and wear out failures. Failures totalized in a failure rate are short circuit...

Aviation Administration (FAA) was quoted as stating turbine engines have a failure rate of one per 375,000 flight hours, compared to of one every 3,200 flight...

In clinical trials, the definition of respiratory failure usually includes increased respiratory rate, abnormal blood gases (hypoxemia, hypercapnia, or...

was now changing as it moved towards understanding the physics of failure. Failure rates for components kept dropping, but system-level issues became more...

FIT rates in the range of 20 to 200 FIT. Field failure rates for aluminum capacitors are in the range of 0.5 to 20 FIT. The data for the "failure rate" specification...

unprotected intercourse, makes imperfect use fairly common. The typical-use failure rate of calendar-based methods is 25% per year. To find the estimated length...

stress cracking. Failure analysis Failure mode and effects analysis (FMEA) Failure modes, effects, and diagnostic analysis (FMEDA) Failure rate Forensic electrical...

Failure Frame: I Became the Strongest and Annihilated Everything with Low-Level Spells (Japanese: ハズレ枠の【状態異常スキル】で最強になった俺がすべてを蹂躙するまで, Hepburn: Hazure Waku...

If the quantity, x, is a "time-to-failure", the Weibull distribution gives a distribution for which the failure rate is proportional to a power of time...