A locknut, also known as a lock nut, locking nut, self-locking nut, prevailing torque nut, stiff nut or elastic stop nut, is a nut that resists loosening...

A distorted thread locknut, is a type of locknut that uses a deformed section of thread to keep the nut from loosening due to vibrations, or rotation...

locknut is a type of industrial fastener composed of two steel threaded parts: a nut body and an elliptical spring steel lock ring. Security locknuts...

are generally referred to as locknuts. Castellated nut Distorted thread locknut Centerlock nut Elliptical offset locknut Toplock nut Interfering thread...

2021 American thriller film Oxford Latin Dictionary Online dating Over-Locknut Distance (or Dimension), a measurement of a bicycle wheel and frame Old...

closer to sling bracket is the adjusting nut locknut. Between the gas piston (lighter colour) and the locknut is the adjusting nut itself. Operating rod...

halves and a split sealing grommet) which are screwed with a hexagonal locknut (like normal cable glands). Thus, pre-assembled cables can be routed without...

typically half as tall as a standard nut. It is commonly used as a type of locknut, where it is "jammed" up against a standard nut to lock the two in place...

These motors, named the Revolution X, use a single overhead cam, screw and locknut valve adjustment, a single internal counterbalancer, and vertically split...

10 people on the ground. The cause of the crash were reused single-use locknuts in the left elevator trim tab system that loosened. Type of aircraft: North...

nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut with a nylon collar that increases friction on the screw thread. The nylon...

(close to the trigger), or more often, outside the trigger guard with a locknut on the outside (to secure its position). In some episodes, the screw was...

for the aerospace industry but are now also common in automotive racing. Locknut types are available, which utilize deformed threads or a nylon locking...

(in the case of threaded headsets) the thickness of the top seal of the locknut. The stack height of a frame and fork is the difference between the steerer...

A speed nut, aka sheet metal nut or Tinnerman nut, is a type of locknut with two sheet metal prongs that act as one thread. They are made from spring...

screw removed Alternator output increased from 375 to 400 watts. All-steel locknut on rear axle, previously castellated nut style. (US Model only, this feature...

inadvertent loss of the front wheel in the case it is not properly secured Locknut: a nut designed not to loosen due to vibration Lockring: a ring, usually...

Interference proceeding, in U.S. patent law Interfering thread nut, a type of locknut Statistical interference, in statistics Intervention (disambiguation) This...

An interfering thread nut is a type of locknut that has an undersized root diameter. This creates an interference between the nut and the fastener, plastically...

industry) Flanges (bolted in pairs) Junker test Locknut (prevailing torque nuts) Nyloc nut Distorted thread locknut Lock wire Mechanical joint Quenching and...

A bicycle head tube with a partially installed bicycle headset; the locknut has yet to be fitted onto the fork steerer tube....

efficient piston-to-cylinder clearance. Valves are adjustable via 'screw and locknut' type clearance adjusters. The engine features an oil sump sight glass...

split beam nut, also known as a split hex nut or slotted beam nut, is a locknut with slots cut in the top that separate the outside end into two or more...

gears). Valve adjustment on first-generation VFR750Fs was by screw and locknut, which changed in 1990 to shim-under-bucket, along with the valve-clearance...

pipe straight–locknut American National Standard Straight Pipe Thread for Loose-fitting Mechanical Joints with Locknuts For use with locknuts NPSM National...

made, some of these have been adjustable by having a threaded end and locknut, to enable the toe to be set precisely. This ability to fine-tune ball-jointed...

side. The act of shifting over the centerline of the rim between axle locknuts is referred to as dishing the wheel. A wheel calibrated so that the planar...

performance, and too small can lead to bent pushrods or burnt valves. A locknut secures the set screw-in place. Loose set screws can cause catastrophic...

bomb casing. This entire target assembly was secured at both ends with locknuts. When the hollow-front projectile reached the target and slid over the...

ways to make space for this was the axle length (measured as the over locknut distance — OLD.) was increased, necessitating more dish on the rear wheel...