A pipe support or pipe hanger is a designed element that transfer the load from a pipe to the supporting structures. The load includes the weight of the...

A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow —...

In computing, a named pipe (also known as a FIFO for its behavior) is an extension to the traditional pipe concept on Unix and Unix-like systems, and is...

A pipe wrench is any of several types of wrench that are designed to turn threaded pipe and pipe fittings for assembly (tightening) or disassembly (loosening)...

building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe, and integral fasteners...

Construction Safety Association of Ontario. "Occupational Health Risks: Pipe Trades" (PDF).{{cite web}}: CS1 maint: url-status (link) Pipe Hangers & Support...

fire protection Pipe Pipe and tube bender Pipefitter Pipe network analysis Pipeline transport Piping and plumbing fittings Pipe support Plastic pipework...

A fitting or adapter is used in pipe systems to connect sections of pipe (designated by nominal size, with greater tolerances of variance) or tube (designated...

Tap water (also known as running water, piped water or municipal water) is water supplied through a tap, a water dispenser valve. In many countries, tap...

heat pipe is a heat-transfer device that employs phase transition to transfer heat between two solid interfaces. At the hot interface of a heat pipe, a...

industry, manufacturing industry, and other commercial and industrial contexts, pipe marking is used to identify the contents, properties and flow direction of...

Piping Technology and Products is a privately owned pipe support manufacturing and engineering company headquartered in Houston, Texas, United States....

HDPE pipe Hydraulic machinery Hydrogen piping Hydrostatic test MS Pipe, MS Tube Pipe Cutting Pipefitter Pipe network analysis Pipe marking Pipe support Piping...

opening on the bottom. A plunger is much more effective with water in the pipe, as water does not compress and thus transmits more of the applied force...

engineering Listing and approval use and compliance Passive fire protection Pipe support Sprinkler fitting Victaulic "Industrial Fire sprinklers". Fire Safety...

cistern was located high above the toilet bowl and connected to it by a long pipe. It was necessary to pull a hanging chain connected to a release valve located...

A churchwarden pipe is a tobacco pipe with a long stem. The history of the pipe style is traced to the late eighteenth or early nineteenth century. Some...

receptacle. Pipe connections are either 1.25" or 1.5", National Pipe Thread (NPT), and a level control to allow for automatic operation; A section of pipe to carry...

densely populated areas where rainwater (from house roofs) is directly piped into the system, as opposed to being allowed to be absorbed by the soil...

A pipe band is a musical ensemble consisting of pipers and drummers. The term pipes and drums, used by military pipe bands is also common. The most common...

Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey...

industrial plumbing fixtures and systems Locating and marking positions for pipe connections, passage holes, and fixtures in walls and floors Measuring, cutting...

and hurls it at high velocity into a pipe fitting, creating a loud hammering noise and greatly stressing the pipe. This condition is usually caused by...

other relief valves are connected to the outlet pipe system, they may open as the pressure in the exhaust pipe system increases. This may cause undesired operation...

jack. A plumbers snake is often used by plumbers to clear a clogged drain pipe or sanitary sewer. Plumber's snakes have a coiled (helix-shaped) metal wire...

hoses. 3⁄4-14NPSH designates female hose ends that mate a hose to a tapered pipe thread without a spigot. The US standard was defined by NFPA 1963, "Standard...

the existing water supply of a toilet via the addition of a threaded tee pipe adapter, and requires no soldering or other plumbing work. Electronic add-on...

a nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings....

and support for them is well integrated into most Unix-like operating systems. Pipes are created using the pipe system call, which creates a new pipe and...

steel pipe racks typically support pipes, power cables and instrument cable trays in petrochemical, chemical and power plants. Occasionally, pipe racks...