The suspension also protects the vehicle itself and any cargo or luggage from damage and wear. The design of front and rear suspension of a car may be...

up suspension or suspended in Wiktionary, the free dictionary. Suspension or suspended may refer to: Car suspension Cell suspension or suspension culture...

Hydropneumatic suspension is a type of motor vehicle suspension system, designed by Paul Magès, invented by Citroën, and fitted to Citroën cars, as well as...

Independent suspension is any automobile suspension system that allows each wheel on the same axle to move vertically (i.e. reacting to a bump on the...

1502, Rover P6, all Iso cars and Alfa Romeo type 116 (and derivatives), as the wheels do not transmit torque to the suspension. Sympathetic camber changes...

suspension is a system of components allowing a machine (normally a vehicle) to move smoothly with reduced shock. Types may include: car suspension,...

conditions, active suspensions use some type of actuator to raise and lower the chassis independently at each wheel. These technologies allow car manufacturers...

A torsion bar suspension, also known as a torsion spring suspension, is any vehicle suspension that uses a torsion bar as its main weight-bearing spring...

Air suspension is used in place of conventional steel springs in heavy vehicle applications such as buses and trucks, and in some passenger cars. It is...

metres (276 ft) Maximum Steepness: 39.2% Cars: 2 Capacity: 40 passengers per car Configuration: Double suspension track (Monorail) Maximum speed: 2.5 metres...

A double wishbone suspension is an independent suspension design for automobiles using two (occasionally parallel) wishbone-shaped arms to locate the...

originally sold and distributed car parts out of a 75 square meter retail building in Murrhardt. In 1995, the first coilover suspension system by the company was...

front suspension only,[citation needed] where it provides a steering pivot as well as a suspension mounting for the wheel. The first production car to use...

incorporating elements of the commonly used MacPherson strut. In cars, suspension refers to the system by which the vehicle maintains contact between...

almost vertical. In cars with double wishbone suspensions, camber angle may be fixed or adjustable, but in MacPherson strut suspensions, it is normally fixed...

A leaf spring is a simple form of spring commonly used for suspension in wheeled vehicles. Originally called a laminated or carriage spring, and sometimes...

in center of gravity. The 1905-14 cars of the American Motor Car Company are one example. Self-leveling suspension systems are designed to maintain a...

composite material in 4 wheelers. Shock absorbers are an important part of car suspension designed to increase comfort, stability and overall safety. The shock...

The Christie suspension is a suspension system developed by American engineer J. Walter Christie for his tank designs. It allowed considerably longer movement...

The suspension of the 2CV was very soft; a person could easily rock the car side to side dramatically. The swinging arm, fore-aft linked suspension system...

car equipped with hydropneumatic suspension, as well as disc brakes. The 1967 series 3 also introduced directional headlights to a mass-produced car....

Chapman strut is a design of independent rear suspension used for light cars, particularly sports and racing cars. It takes its name from, and is best known...

Avant. This was the world's first car to be mass-produced with front-wheel drive and four-wheel independent suspension, as well as unibody construction...

In chemistry, a suspension is a heterogeneous mixture of a fluid that contains solid particles sufficiently large for sedimentation. The particles may...

unusual on pre-WW2 cars due to the generally much stiffer suspension and acceptance of body roll. From the 1950s on, however, production cars were more commonly...

Motor Company in 1910–1911), independent suspension, and four-wheel brakes. Since the 1920s, nearly all cars have been mass-produced to meet market needs...

such as low-profile tires, altered suspension, and the addition of spoilers can change the overall appearance of the car, as well as adding downforce to...

A suspension bridge is a type of bridge in which the deck is hung below suspension cables on vertical suspenders. The first modern examples of this type...

were the first form of hydraulic shock absorber or damper used for car suspension. They appeared in the 1930s and were most commonly used in the 1950s...

independent suspension. In contrast, competitor Lamborghini had first used full independent suspension in 1964. The Bora was the second-most expensive car of the...