A loudspeaker enclosure or loudspeaker cabinet is an enclosure (often rectangular box-shaped) in which speaker drivers (e.g., loudspeakers and tweeters)...

often simply referred to as a speaker or loudspeaker, comprises one or more such speaker drivers, an enclosure, and electrical connections possibly including...

A transmission line loudspeaker is a loudspeaker enclosure design which uses the topology of an acoustic transmission line within the cabinet, compared...

(also known as a ported, vented box or reflex port) is a type of loudspeaker enclosure that uses a port (hole) or vent cut into the cabinet and a section...

waves to the open air. Another type is a woofer driver mounted in a loudspeaker enclosure which is divided by internal partitions to form a zigzag flaring...

A speaker enclosure using a passive radiator usually contains an "active loudspeaker" (or main driver), and a passive radiator (also known as a "drone...

and is both assisted and complicated by the necessity of using a loudspeaker enclosure to couple the cone motion to the air. If done well, many of the...

Magazine in 1952 and thereafter. The Transmission line type of loudspeaker enclosure was proposed in October 1965 by Dr A.R. Bailey and A.H. Radford...

For high fidelity reproduction of sound, multiple loudspeakers are often mounted in the same enclosure, each reproducing a different part of the audible...

input impedance and the sound output of a system comprising a loudspeaker and enclosure. Many of the parameters are strictly defined only at the resonant...

electrostatic headphones. The loudspeaker's cabinet is known as the enclosure. There are a variety of loudspeaker enclosure designs, including sealed cabinets...

electronic equipment Computer enclosure or computer case Loudspeaker enclosure, the box containing a loudspeaker system Disk enclosure, a specialized chassis...

speaker enclosure (cabinet), often with a built-in amplifier. Subwoofers are made up of one or more woofers mounted in a loudspeaker enclosure—often made...

audio. A powered loudspeaker works the same way as a passive speaker, but the power amplifier is built into the loudspeaker enclosure. This design is common...

compound enclosure has two chambers. The dividing wall between the chambers holds the driver; typically only one chamber is ported. If the enclosure on each...

A soundbase or sound base is a loudspeaker enclosure designed for a television to stand on. It creates a reasonable stereo effect from a single cabinet...

used to adjust the tuning frequency of the loudspeaker enclosure. In this sense, a loudspeaker enclosure with passive radiators emulates a mass-spring...

The isobaric loudspeaker configuration was first introduced by Harry F. Olson in the early 1950s, and refers to systems in which two or more identical...

waveguide methods, such as a large pipe organ or, for reproduction, exotic loudspeaker designs such as transmission line, rotary woofer, or traditional subwoofer...

small and of restricted sound quality to conserve space. PC speaker Loudspeaker enclosure Altec Lansing. "Our History". Archived from the original on 6 January...

state of Kentucky, US War cabinet, typically set up in wartime Loudspeaker enclosure Computer case A slotted screwdriver blade type Serving area interface...

complete system comprising the audio crossover and the loudspeaker drivers in their enclosure(s) is the design goal. Such a goal is often achieved using...

sealed enclosure of about 1.7 cu ft (48 L) to provide the restoring force for the woofer cone. The entrapped air of the sealed-loudspeaker enclosure, unlike...

the system enclosure, the relationship of maximum reference efficiency to cut-off frequency and enclosure volume for closed-box loudspeaker systems was...

airborne sound Components in a loudspeaker enclosure used to negate the out-of-phase sound waves from the rear of the loudspeaker Components in a suppressor...

than loudspeaker enclosures containing physically separated drivers. As well, the pattern of response is symmetric around the axis of the loudspeaker. Since...

Loudspeaker enclosure being constructed out of MDF...

inexpensive multimedia loudspeakers to more costly esoteric systems, the latter often using large transmission line or horn loaded enclosures to increase low...

a single mathematical loudspeaker enclosure model that could be used to describe sealed, vented, and passive radiator enclosures, and similar types with...

A PC speaker is a loudspeaker built into some IBM PC compatible computers. The first IBM Personal Computer, model 5150, employed a standard 2.25 inch...