Microstrip is a type of electrical transmission line which can be fabricated with any technology where a conductor is separated from a ground plane by...

In telecommunication, a microstrip antenna (also known as a printed antenna) usually is an antenna fabricated using photolithographic techniques on a printed...

Microstrip-line band-stop filter is convenient to implement with low cost and light weight. Hsieh & Wang (2005) stated that, conventional microstrip band-stop...

stripline, and is one of the four main types in modern use, along with microstrip, suspended stripline, and coplanar waveguide. All four of these types...

In nuclear electronics, a microstrip detector is a particle detector that consists of a large number of identical semiconductor strips laid out along one...

Ports are where an external waveguide or transmission line, such as a microstrip line or a coaxial cable, connects to the device. For a three-port circulator...

original type of microstrip antenna described by Howell in 1972. The two metal sheets together form a resonant piece of microstrip transmission line...

isolation between adjacent traces can be achieved more easily than with microstrip. Stripline provides for enhanced noise immunity against the propagation...

far fewer phase shifters than other methods and can be implemented in microstrip on a low-cost printed circuit board. The antenna elements fed by a Butler...

the high-frequency characteristics of the microstrip into account. When a pulse is launched into the microstrip by the transmitter, its amplitude depends...

pair), coaxial cable, and planar transmission lines such as stripline and microstrip. The higher the frequency of electromagnetic waves moving through a given...

but horn antennas, slot antennas and lens antennas are also used. Flat microstrip antennas are being increasingly used in consumer devices. Another directive...

Differential pairs include: Twisted-pair cables, shielded and unshielded Microstrip and stripline differential pair routing techniques on printed circuit...

"Fractal-based multi-band microstrip filters", ch. 6 in, Crnojević-Bengin, Vesna (ed), Advances in Multi-Band Microstrip Filters, Cambridge University...

manufacturing techniques. The structures shown can also be implemented using microstrip or buried stripline techniques (with suitable adjustments to dimensions)...

response, noise performance, and distortion. Via fences are used to shield microstrip and stripline transmission lines, guard edges of printed circuit boards...

Power divider in microstrip technology...

common return conductor, typically the cable shielding. Likewise, multiple microstrip circuits can all use the same ground plane for the return path. This compares...

transmission lines can be laid out in a planar form such as stripline or microstrip with carefully controlled dimensions to assure a consistent impedance...

areas such as wave propagation, impedance transformations, filters and microstrip printed circuit board design.[citation needed] Radio electronics is concerned...

Electromagnetics Lab from 1982 to 1990. Lo had served as a distinguished lecturer in microstrip antenna theory. In 1986, Lo was elected to the National Academy of Engineering...

fellow. Pozar's research interests focus on the design and analysis of microstrip antennas and phased arrays. He has authored multiple books on antenna...

2019). "Design, Simulation and Implementation of Very Compact Dual-band Microstrip Bandpass Filter for 4G and 5G Applications". 2019 16th International Conference...

work so well in the now popular microstrip format, although designs do exist. The reason for this is that microstrip is not a homogeneous medium – there...

current carrying requirements are usually much less. Ground plane Stripline Microstrip Watanabe, Tetsushi; Fujihara, Hiroshi; Wada, Osami; Koga, Ryuji; Kami...

generator circuits. In 1977, the Intelsat V satellite receiver used a microstrip tunnel diode amplifier (TDA) front-end in the 14–15.5 GHz frequency band...

compatible with high-frequencies. Unfortunately, above 10 GHz, the well known microstrip and coplanar lines technologies cannot be used because they have high...

transmission-line resonators are commonly employed for coplanar, stripline, and microstrip transmission lines. Such planar transmission-line resonators can be very...

(DGS) is a purposefully-created defect on the ground plane of a printed microstrip board. It is typically created in the form of an etched-out pattern on...

dipole section into equal phase. Another type is the omnidirectional microstrip antenna (OMA). Omnidirectional radiation patterns are produced by the...