aluminum - with silicon as the quantitatively most important alloying element. Pure AlSi alloys cannot be hardened, the commonly used alloys AlSiCu (with...

6061 aluminium alloy (Unified Numbering System (UNS) designation A96061) is a precipitation-hardened aluminium alloy, containing magnesium and silicon as...

cast aluminium alloy system is Al–Si, where the high levels of silicon (4–13%) contribute to give good casting characteristics. Aluminium alloys are widely...

Aluminium–magnesium–silicon alloys (AlMgSi) are aluminium alloys—alloys that are mainly made of aluminium—that contain both magnesium and silicon as the...

6082 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its...

6060 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is much more closely related to the alloy 6063...

hardenable alloys such as aluminium-magnesium-silicon alloys (AlMgSi) or the naturally hard (non-hardenable) alloys. Aluminium–copper alloys were standardised...

embrittlement than many other aluminium alloys because of microsegregation, but has significantly better corrosion resistance than the alloys from the 2000 series...

AA 6063 is an aluminium alloy, with magnesium and silicon as the alloying elements. The standard controlling its composition is maintained by The Aluminum...

by heat treatment) alloys. Other AlMg alloys are aluminium–magnesium–copper alloys (AlMgCu) and aluminium–magnesium–silicon alloys (AlMgSi, 6000 series)...

listed: Aluminium bronzes are most valued for their higher strength and corrosion resistance as compared to other bronze alloys. These alloys are tarnish-resistant...

types of aluminium alloys, heat-treated) to produce tempers with a higher strength but a lower ductility. Like most other aluminium-manganese alloys, 3003...

6005 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is closely related, but not identical, to...

This is a list of named alloys grouped alphabetically by the metal with the highest percentage. Within these headings, the alloys are also grouped alphabetically...

4% maximum Manganese - 0.1% maximum Silicon - 0.25% maximum Zinc - 0.1% maximum Remainder Aluminium A similar alloy A5652 exists differing only in impurities...

moderate-strength alloy having good corrosion resistance is met by alloy 5083.[citation needed] Hydronalium "Aluminium Alloys - Aluminium 5083 Properties...

Aluminium–manganese alloys (AlMn alloys) are aluminium alloys that contain manganese (Mn) as the main alloying element. They consist mainly of aluminium...

Magnesium alloys are mixtures of magnesium (the lightest structural metal) with other metals (called an alloy), often aluminium, zinc, manganese, silicon, copper...

Aluminium brass is a technically rather uncommon term for high-strength and partly seawater-resistant copper-zinc cast and wrought alloys with 55–66%...

the 2000-series aluminium alloys, after 2024 aluminium alloy. It is commonly extruded and forged. The corrosion resistance of this alloy is particularly...

The aluminium-copper alloys have high strength, but are generally less corrosion resistant and harder to weld than other types of aluminium alloys. To...

hypereutectic aluminum alloy with silicon content greater than the eutectic point of 12 weight percent silicon. Most aluminum-silicon casting alloys are hypoeutectic...

consumption of metallurgical purity silicon goes for production of aluminium-silicon alloys (silumin alloys) for aluminium part casts, mainly for use in the...

T-653.2 "Properties of Wrought Aluminium and Aluminium Alloys: 2024, Alclad 2024", Properties and Selection: Nonferrous Alloys and Special-Purpose Materials...

6005A aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is closely related, but not identical, to...

aluminium alloy is an aluminium alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is related to 6063 aluminium alloy (Aluminum...

Plate EN 485-2: Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties EN 573-3: Aluminium and aluminium alloys. Chemical composition...

Titanium alloys are alloys that contain a mixture of titanium and other chemical elements. Such alloys have very high tensile strength and toughness (even...

Copper alloys are metal alloys that have copper as their principal component. They have high resistance against corrosion. Of the large number of different...

The alloy composition of 1050 aluminium is: Aluminium: 99.5% min Copper: 0.05% max Iron: 0.4% max Magnesium: 0.05% max Manganese: 0.05% max Silicon: 0...