A band-pass filter or bandpass filter (BPF) is a device that passes frequencies within a certain range and rejects (attenuates) frequencies outside that...

Bandpass or band-pass may refer to: Band-pass filter Bandpass signal Bandpass sampling All pages with titles containing bandpass All pages with titles...

that can pass through a filter. For example, a radio receiver contains a bandpass filter to select the frequency of the desired radio signal out of all the...

In signal processing, undersampling or bandpass sampling is a technique where one samples a bandpass-filtered signal at a sample rate below its Nyquist...

the bandpass filter allows the frequency of the desired radio transmission to pass through, and blocks signals at all other frequencies. The bandpass filter...

called bandpass, and a common desire (for various reasons) is to convert it to baseband. One way to do that is frequency-mixing (heterodyne) the bandpass function...

channels, cutoff frequency applies to an edge in a lowpass, highpass, bandpass, or band-stop characteristic – a frequency characterizing a boundary between...

or a band of wavelengths, blocking both longer and shorter wavelengths (bandpass). The passband may be narrower or wider; the transition or cutoff between...

impedance and zero output impedance to implement a 2-pole low-pass, high-pass, bandpass, bandstop, or allpass response. The VCVS filter allows high Q factor and...

that the filter possesses. The usual bandforms are lowpass, highpass, bandpass and bandstop, but others are possible. In particular, it is possible for...

which usually is expressed in hertz. A bandpass filter typically has two stopbands. The shape factor of a bandpass filter is the relationship between the...

synthesizers including a filter that can be switched from low pass to bandpass and two envelopes that can be looped over the AD (attack decay) sections...

frequency of a receiver. The farther apart the bandpass frequency and the image frequency are, the more the bandpass filter will attenuate any interfering image...

An anti-aliasing filter (AAF) is a filter used before a signal sampler to restrict the bandwidth of a signal to satisfy the Nyquist–Shannon sampling theorem...

continuous range of wavelengths. The bandpass AB magnitude is defined so that the zero point corresponds to a bandpass-averaged spectral flux density of...

total bandpass to 6 kHz. The sound is then acceptable for voice, if not for music. It is also possible to add other lines, each increasing the bandpass by...

receiver, which extracts the information signal. The receiver first uses a bandpass filter to separate the desired radio station's radio signal from all the...

is used intentionally on signals with no low-frequency content, called bandpass signals. Undersampling, which creates low-frequency aliases, can produce...

The FM broadcast band is a range of radio frequencies used for FM broadcasting by radio stations. The range of frequencies used differs between different...

transmission coefficient of the bandpass FSS to obtain (if we use L1, C1 for the bandstop patch FSS and L2, C2 for the bandpass mesh FSS): L 2   =   C 1  ...

either side of the carrier frequency. Single-sideband modulation uses bandpass filters to eliminate one of the sidebands and possibly the carrier signal...

dynamic range because the signal strength is initially unknown, (3) narrow bandpass to discriminate the signal of interest from other electromagnetic radiation...

focal-plane array with a bandpass of 1100–2800 nm and a six-position filter wheel. The filter center wavelengths (and bandpass widths (FWHM)) were: 1100 nm...

In radio communications, single-sideband modulation (SSB) or single-sideband suppressed-carrier modulation (SSB-SC) is a type of modulation used to transmit...

control the frequency of the radio waves generated. They are also used as bandpass filters as well as antennas. In the late 19th century, Lord Rayleigh demonstrated...

highpass, bandpass or notch responses. Some musical VCFs offer a variable slope which determines the rate of attenuation outside the bandpass, often at...

exited into a single horn but at differing distances depending on the bandpass. It was marketed as the "CoEntrant" horn. The mid- and high-frequency drivers...

operation section, the resolution bandwidth filter or RBW filter is the bandpass filter in the IF path. It's the bandwidth of the RF chain before the detector...

analog bandpass filtering to avoid harmonic distortion and periodic spectrum. At the receiver side, the demodulator typically performs: Bandpass filtering...

5-8 day, 12-20 day and 20-60 day bandpass-filtered IMD rainfall anomalies of 2018 averaged over the state of Kerala.[clarification needed]...