Heat treating (or heat treatment) is a group of industrial, thermal and metalworking processes used to alter the physical, and sometimes chemical, properties...

Differential heat treatment (also called selective heat treatment or local heat treatment) is a technique used during heat treating of steel to harden...

B209 ASTM B221 ASM Handbook Committee (1991). "Heat Treating of Aluminum Alloys". Volume 4: Heat Treating (PDF). ASM. p. 871. doi:10.1361/asmhba0001205...

in the blade they could affect the finishing and when it came time to heat treat the blade, the hardening and tempering might not be as even. Potentially...

both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for...

necessary to know what state the metal was in for heat treating it and the only way to do this was to heat it up to a colour which was known to be best for...

minimize the cost of excess sprue, and thus overall melting costs. Heat treating is a group of industrial and metalworking processes used to alter the...

quenched, although they may not always be visible. There are many types of heat treating processes available to steel. The most common are annealing, quenching...

be brittle, and not suitable for some game hunting.[citation needed] Heat treating can increase the hardness of commonly used lead alloys. The basic procedure...

to become harder and stronger through heat treating; however, it becomes less ductile. Regardless of the heat treatment, a higher carbon content reduces...

naturally, the majority is the result of heat-treating amethyst or smoky quartz. Carnelian has been heat-treated to deepen its color since prehistoric times...

preservation in which packaged foods (e.g., milk and fruit juices) are treated with mild heat, usually to less than 100 °C (212 °F), to eliminate pathogens and...

Tempering is a process of heat treating, which is used to increase the toughness of iron-based alloys. Tempering is usually performed after hardening...

George E. (eds.). Heat Treating, an International ... Symposium on Residual Stresses in the Heat Treatment Industry. 20th ASM Heat Treating Society Conference...

was founded in 1966 by Bill and Ed Busch. With a background in the heat treating industry, the Busch brothers founded a company in Detroit called CryoTech...

the blade). Steel's exact flex and strength vary dramatically with heat treating. If steel cools quickly it becomes martensite, which is very hard but...

structure being a metastable carbide in a pearlitic matrix. Through an annealing heat treatment, the brittle structure as first cast is transformed into the malleable...

2530. PMID 9896377. Dossett, Jon L.; Boyer, Howard E. (2006) Practical heat treating. ASM International. pp. 1–14. ISBN 1-61503-110-3. Metallurgy for the...

December 2019. Dossett, J; Totten, GE, eds. (2014). ASM Handbook Vol 4D Heat treating of irons and steels. ASM International. pp. 382–396. doi:10.31399/asm...

while both martensite and ferrite are strongly ferromagnetic. During heat treating, a blacksmith causes phase changes in the iron-carbon system to control...

commonly this concept is used in welding, but it is also used when heat treating and casting cast iron. In welding, equivalent carbon content (C.E) is...

melted then sprayed on the surface of the material being treated at a high velocity. The spray treating process is known by many different names such as HVOF...

Profile & Executives - WSJ". www.wsj.com. Heat Treating Progress: The Official Voice of the ASM Heat Treating Society. ASM International. 2002. "MKS Instrument...

formulations as a solvent and water repellent to "envelope treat" timber. This involves just treating the outer 5 mm of the cross-section of a timber member...

requirements for production materials, products and services (e.g., heat treating, painting and plating). Develop policies and procedures for the common...

shrinking Plastic heating prior to forming Plastic welding Glass & metal heat treating Cooking Warming suckling animals or captive animals in zoos or veterinary...

will have a small amount of porosity. This prevents any heat treating or welding, because the heat causes the gas in the pores to expand, which causes micro-cracks...

Former name(s) Journal of Materials Shaping Technology, Journal of Heat Treating, Journal of Materials Engineering History 1992-present Publisher Springer...

increase in strength due to work hardening may be comparable to that of heat treating. Therefore, it is sometimes more economical to cold work a less costly...

Elastomer Seals (SEAL) Electronics (ETG) Fluids Distribution (FLU) Heat Treating (HT) Materials Testing Laboratories (MTL) Measurement & Inspection (M&I)...