Vinyl ester resin (redirect from Vinylester)
homebuilt airplanes, the Glasair and Glastar kit planes made extensive use of vinylester fiberglass-reinforced structures. It is a common resin in the marine industry...
3 KB (368 words) - 19:59, 30 September 2023
launched in early 2016. In the interim period, advances in infusable vinylester resin chemistry have seen the incorporation of nano particles into the...
9 KB (787 words) - 12:45, 14 December 2023
adhesive (also called mortar) usually consisting of epoxy, polyester, or vinylester resins. In bonded anchors, the force-transfer mechanism is based on bond...
20 KB (2,230 words) - 12:42, 1 October 2024
and boats. Normal gelcoat formulated for use with polyester resins and vinylester resins does not adhere to epoxy surfaces, though epoxy adheres very well...
70 KB (8,471 words) - 14:58, 19 August 2024
occasionally Kevlar) combined with a structural plastic (usually epoxy, although vinylester is used in some aircraft). The fabric is saturated with the structural...
27 KB (3,037 words) - 04:10, 19 August 2024
a wave-piercer trimaran hull from, constructed exclusively of infused vinylester carbon fibre cored sandwich materials for all structural elements, with...
29 KB (3,144 words) - 19:49, 22 September 2024
com).[citation needed] Resins: Any, e.g. epoxy, polyurethane, polyester, vinylester, phenolics, furans, polyimides. Fibers: Glass, aramid, carbon and boron...
13 KB (1,735 words) - 15:18, 17 September 2024
Vosper Thornycroft Ron Holland 2004 1-mast (sloop rig) aramid foam core/vinylester sandwich flybridge, refitted at Pendennis in 2014 Badis 70.00 m (230 ft)...
80 KB (115 words) - 20:17, 31 August 2024
size are typically made from steel or aluminium, an aramid foam core/vinylester sandwich build was chosen to achieve a shorter delivery date, reduced...
13 KB (1,040 words) - 15:02, 27 August 2024
built using composite molding: glass fibre and/or carbon fibre mats and vinylester or epoxy resin using either a wet layup technique or using heat-cured...
10 KB (720 words) - 15:18, 16 March 2024
resin types may be used in pultrusion including polyester, polyurethane, vinylester and epoxy. Resin provides the resistance to the environment, (i.e., the...
7 KB (952 words) - 09:06, 27 May 2024
followed by reglassing the exterior with several layers of fiberglas with vinylester resin or polyester resin. However many of the blisters have returned on...
4 KB (519 words) - 00:01, 23 July 2023
in the form of a thermosetting plastic (usually epoxy, polyester, or vinylester) and some kind of fiber cloth (fiberglass, kevlar, dynel, carbon fiber...
37 KB (5,303 words) - 08:11, 8 September 2024
completed. The Lagoon 470 is a recreational catamaran, built predominantly of vinylester fiberglass sandwich, with wood trim. It has a fractional sloop rig, with...
9 KB (576 words) - 01:22, 2 June 2024
recreational and racing sailboat, built predominantly of a vacuum-infused vinylester glassfibre and foam sandwich for both the hull and the deck. It has a...
16 KB (1,217 words) - 20:16, 1 June 2024
production. The Swan 58 is a recreational keelboat, built predominantly of vinylester vacuum-infused glassfibre with carbon fibre reinforcement and with wood...
11 KB (836 words) - 19:10, 1 June 2024
The Sun Odyssey 40 is a recreational keelboat, built predominantly of vinylester fiberglass, with wood trim. The hull is solid fiberglass, while the deck...
7 KB (461 words) - 01:39, 9 September 2023
versions, from fiberglass. The sixth generation boats are made from infused vinylester over a Core-Cell foam core, with an inner carbon fiber skin, for improved...
9 KB (710 words) - 07:15, 5 June 2024
fiberglass, with wood trim. The primary construction uses a vacuum infused vinylester-balsa sandwich. It has a 9/10 fractional sloop rig, with a keel-stepped...
13 KB (895 words) - 16:52, 4 January 2024
The Sun Odyssey 36i is a recreational keelboat, built predominantly of vinylester fiberglass, with a balsa-cored deck, hand-laid hull and wood trim. It...
12 KB (972 words) - 16:51, 4 January 2024
Draft 3.707349 ft 0 in (1.13 m) Hull Type Polyester GRP with Coremat. Vinylester resin infusion with coremat 2021 onwards Construction Fiberglass Hull...
3 KB (171 words) - 07:19, 11 February 2024
materials and techniques. These newer boats use foam-sandwich construction, vinylester resins and multiaxial glass. They are 25% lighter, as well as being much...
7 KB (682 words) - 12:38, 29 October 2023
resin types may be used in pultrusion including polyester, polyurethane, vinylester epoxy, isophthalic polyester, Orthophthalic and phenolics. Fiberglass...
4 KB (487 words) - 16:26, 14 July 2024
The Sun Odyssey 40.3 is a recreational keelboat, built predominantly of vinylester and polyester fiberglass, with a structural grid and wood trim. It has...
9 KB (776 words) - 01:19, 2 June 2024
built predominantly of glassfibre, with wood trim. The hull is solid vinylester fibreglass and the deck is balsa-cored. It has a fractional sloop rig...
12 KB (972 words) - 09:28, 6 July 2024
between the fibers but also lithium-ion transport, unlike commonly used vinylester or epoxy matrices. This type of energy storage system can be based on...
9 KB (875 words) - 09:25, 7 October 2024
displacement recreational keelboat, built predominantly of vacuum bag moulding vinylester, S-glass, E-glass, Klegecell foam and a balsa core, with wood trim. It...
10 KB (919 words) - 17:24, 22 June 2023
Elite Boat Crew 3 Draft 1.1 m (3 ft 7 in) Hull Type Monohull Construction Vinylester GRP Hull weight 975 kg (2,150 lb) LOA 7.4 m (24 ft) Beam 1.72 m (5 ft...
5 KB (394 words) - 13:25, 11 September 2022
built predominantly of hand-laid glassfibre, with wood trim. It uses vinylester resin for the outer skin and polyester resin for the interior. It has...
12 KB (858 words) - 17:52, 6 January 2024
production. The Swan 70 is a racing keelboat, built predominantly of vinylester glassfibre and aramid, with carbon fibre reinforcements and wooden trim...
11 KB (887 words) - 16:45, 4 January 2024