The SNECMA Turbomeca Larzac is a military turbofan manufactured by GRTS (Groupement Turbomeca-SNECMA), a consortium between the two French companies, SNECMA...

better efficiency than the CFM LEAP. SNECMA Coleoptere SNECMA Atar SNECMA M53 SNECMA M88 SNECMA Turbomeca Larzac EuroProp TP400-D6 (as part of Europrop...

Rolls-Royce Turbomeca Limited (RRTM) is a joint venture between British aero-engine manufacturer Rolls-Royce plc (UK) and French helicopter engine specialist...

The Rolls-Royce Turbomeca Adour is a two-shaft low bypass turbofan aircraft engine developed by Rolls-Royce Turbomeca Limited, a joint venture between...

Eurotrainer". Each of these proposals were to be powered by twin SNECMA Turbomeca Larzac turbofan engines. The German Air Force insisted that the trainer...

The Rolls-Royce Turbomeca RTM322 is a turboshaft engine currently produced by Safran Helicopter Engines. The RTM322 was originally conceived and manufactured...

Safran Helicopter Engines, previously known as Turbomeca, is a French manufacturer of low- and medium-power gas turbine turboshaft engines for helicopters...

The Turbomeca Astazou is a highly successful series of turboprop and turboshaft engines, first run in 1957. The original version weighed 110 kg (243 lb)...

The Turbomeca TM 333 is a turboshaft engine manufactured by French company Turbomeca and designed for helicopters weighing 4-5 tonnes. It first ran in...

The Rolls-Royce/Snecma Olympus 593 was an Anglo-French turbojet with reheat, which powered the supersonic airliner Concorde. It was initially a joint project...

Helicopter Engines. "Turbomeca buy gives Snecma a foothold in turboshaft market". Aviation Week. Sep 4, 2000. p. 30. "New Turbomeca engine to power India's...

project. One issue was French insistence that the aircraft be powered by the SNECMA M88, in development at the same time as the XG-40. The Eurojet consortium...

The Turbomeca Arriel is a series of French turboshaft engines that first ran in 1974. Delivering 650 to 1,000 hp (480 to 750 kW), over 12,000 Arriel engines...

the SNECMA Turbomeca Larzac engine, with 14.1 kN of thrust, as under-powered. In response, in August 2005, HAL reached a deal to replace the SNECMA engine...

The Turbomeca Marboré is a small turbojet engine that was produced by Turbomeca from the 1950s into the 1970s. The most popular uses of this engine were...

The Rolls-Royce/SNECMA M45H is an Anglo-French medium bypass ratio turbofan produced specifically for the twin-engined VFW-Fokker 614 aircraft in the early...

The Turbomeca Makila is a family of French turboshaft engines for helicopter use, first run in 1976 and flown in 1977. Typical power output is around...

competition in February 2002, because the engine core, which is based on the Snecma M88 turbofan fighter engine, was too heavy and used too much fuel. By May...

The Turbomeca Arrius is one of a family of turboshaft engines for helicopter use, first produced in 1981. As of 2012, some 2,700 units had been sold....

MTU Turbomeca Rolls-Royce GmbH (MTR) is a multinational engine manufacturer established to develop, manufacture, and service the MTR390 turboshaft engine...

SaM146 is a turbofan engine produced by the PowerJet joint venture between Snecma (Safran) of France and NPO Saturn of Russia. Developing 68–80 kN (15,000–18...

Rolls-Royce/MAN Turbo RB.153 RB.193 Rolls-Royce/Snecma M45H Rolls-Royce Turbomeca: Adour Snecma/Turbomeca Larzac Turbo-Union RB199 ATEC T900 Avco/Pratt & Whitney...

The Turbomeca Aspin was a small French turbofan engine produced by Turbomeca in the early 1950s. This geared turbofan design was the first turbofan to...

The Turbomeca Astafan is a single-spool, variable-pitch turbofan engine developed from the Turbomeca Astazou.: 553 : 932  Despite successful flight-testing...

The Turbomeca Turmo is a family of French turboshaft engines manufactured for helicopter use. Developed from the earlier Turbomeca Artouste, later versions...

hardpoints for the carriage of armament. The aircraft is powered by two Snecma-Turbomeca Larzac 04R20 turbofan engines, rated at 3,175 lbf (14.12 kN), that had...

The MTU Turbomeca Rolls-Royce MTR390 is a turboshaft developed for light helicopter applications by MTU Turbomeca Rolls-Royce (MTR). The engine is designed...

Rolls-Royce/MAN Turbo RB.153 RB.193 Rolls-Royce/Snecma M45H Rolls-Royce Turbomeca: Adour Snecma/Turbomeca Larzac Turbo-Union RB199 ATEC T900 Avco/Pratt & Whitney...

The Turbomeca Palouste is a French gas turbine engine, first run in 1952. Designed purely as a compressed air generator, the Palouste was mainly used...

The Turbomeca Aubisque was a small turbofan engine designed and produced by Turbomeca in the 1960s. Its only application was the Saab 105 military trainer...