place today. Tenon saw – a midsized backsaw. The saw derives its name from its use in the cutting of tenons for mortise and tenon joinery. Tenon saws are...

mortise in the instrument's endblock. This is typically used on acoustic and hollow-body electric guitars. With a simpler mortise and tenon joint, which...

the labium is damaged, making the instrument unplayable. The instrument has tenons on both ends of the instrument, suggesting the presence of now lost...

because the neck receiver/tenon system is prone to excessive wear and can develop leaks over time, hindering the instrument's playability if not corrected...

/ˈluːθiər/ LOO-thee-ər) is a craftsperson who builds or repairs string instruments. The word luthier is originally French and comes from the French word...

A spirit level, bubble level, or simply a level, is an instrument designed to indicate whether a surface is horizontal (level) or vertical (plumb). Two...

end had a tenon which fitted into the top of the com (soundbox). On a low-headed harp the corr was morticed at the bass end to receive a tenon on the lámhchrann;...

improve institutional hygiene. Tenon, Jacques (1724-1816) Auteur du texte (1788). Mémoires sur les hôpitaux de Paris, par M. Tenon,...{{cite book}}: CS1 maint:...

binding. Medium tenon neck joints with dowel reinforcements were used up until 1981 and standard Gibson style long and medium tenon neck joints were...

The guitar is a stringed musical instrument that is usually fretted (with some exceptions) and typically has six or twelve strings. It is usually held...

in that it is constructed from thirteen sections of bone connected using tenons and sockets (with bronze ferrules) rather than the long, bronze tube described...

Western concert flute is a family of transverse (side-blown) woodwind instruments made of metal or wood. It is the most common variant of the flute. A...

and an anchor plate, unlike traditional guitar construction, in which a tenon on the neck is glued into a slot on the body. The first neck was wider at...

woodwind instrument is that part of the instrument which is placed partly in the player's mouth. Single-reed instruments, capped double-reed instruments, and...

War. In time the instrument would be tuned for performance on the knee rather than off it, and the foot joint remnant today is the tenon cut around the...

They are also more prone to breakage since more pressure is placed on the tenon when the pipe is supported around the mouthpiece. Long ago, churchwarden...

bore used in modern flutes. Unlike other woodwind instruments, in most wooden piccolos, the tenon joint that connects the head to the body has two interference...

higher priced Tokai Gibson replicas have nitrocellulose finishes and long tenon neck joints. Tokai guitars have been made in Japan, Korea and China. Korean...

nut is then attached; it is also screwed down by two wood screws at the tenon end which ends just before the bridge pick-up. The Greg Fryer, Burns/Brian...

mortise (5) and tenon (6) joint is an air-tight, simple connection of two detachable parts where the mortise is a hole met by the tenon, a tight-fitting...

Czech Republic, and one built using split oak timbers with mortise and tenon and notched corners excavated in eastern Germany, dating from about 7,000...

different names depending on the length of the blade; "tenon saw" (from use in making mortise and tenon joints) is often used as a generic name for all the...

J. G. Haltenhof replaced the tenon and socket fittings with slides in 1776. About 4 years later the Parisian instrument makers Joseph and Lucien-Joseph...

a tenon-and-dowel neck joint similar to what was used on some Greco guitars. Burny guitars made by Matsumoku in 1985-86 had a screw-down bolt tenon that...

joining the neck of a stringed instrument with its body. This is typically done with a tightly fitted mortise-and-tenon or dovetail joint, secured with...

serial number is marked near the top of the body just below the barrel tenon, and rarely at the bottom of the body just above the bell seam. The last...

Dado Dovetail Finger Groove Halved Hammer-headed tenon Knee Lap Mason's mitre Miter Mortise and tenon Rabbet/Rebate Scarf Splice Tongue and groove Profiles...

a woodworking tool used by a carpenter or joiner to scribe mortise and tenon joints on wood prior to cutting. Mortise gauges are commonly made of hardwood...

in the common two-piece instruments provided with a metal tenon. The bawu typically has a range of an eleventh: on an instrument in "G" (according to Chinese...

and the boring machine. They can also cut joinery such as mortises and tenons. A CNC router is very similar in concept to a CNC milling machine. Instead...