The Melt Flow Index (MFI) is a measure of the ease of flow of the melt of a thermoplastic polymer. It is defined as the mass of polymer, in grams, flowing...

lowers viscosity. Melt flow index A value roughly inversely proportional to the molecular weight of the base polymer. High melt flow index adhesives are easy...

noninvasive and contact-free cardiac diagnostic method Melt flow index, a measure of the ease of flow of the melt of a thermoplastic polymer Micromechanical Flying...

These changes affect physical properties like strength, malleability, melt flow index, appearance and colour. The changes in properties are often termed...

25 °C and atactic portion remains soluble in p-xylene. The melt flow rate (MFR) or melt flow index (MFI) is a measure of molecular weight of polypropylene...

probability and information theory Malleable iron, a type of cast iron Melt Flow Index, a characteristic property of a thermoplastic polymer as a means of...

of wood to plastic in the composite will ultimately determine the melt flow index (MFI) of the WPC, with larger amounts of wood generally leading to...

state are: Thickness (smooth sheet, textured, asperity height) Density Melt flow index Mass per unit area (weight) Vapor transmission (water and solvent)...

virgin material, as it is possible to produce them with the right melt flow index needed for good results. Low quality mixed plastics can be recycled...

Squeeze flow (also called squeezing flow, squeezing film flow, or squeeze flow theory) is a type of flow in which a material is pressed out or deformed...

which the magma reaches the surface. The original melt formed in the upper mantle (the primitive melt) cannot have the composition of quartz tholeiite...

of a glass (or vitreous solid) is a non-crystalline solid formed by rapid melt quenching. However, the term "glass" is often defined in a broader sense...

fittings — Designation of polyethylene, based on nominal density and melt flow index [Withdrawn: replaced with ISO 10162] ISO 4057:1986 Information processing...

the pipe with the lower melt flow index can be heated earlier than the other, such that both pipe ends have the same melt viscosity at the end of the...

melting temperatures of the typical minerals that can crystallize from the melt and are therefore the first to form solid crystals. Classification of andesites...

On March 27, 1980, a series of volcanic explosions and pyroclastic flows began at Mount St. Helens in Skamania County, Washington, United States. A series...

hundreds of kilometers. The ejection of hot material from the volcano's summit melts snowbanks and ice deposits on the volcano, which mixes with tephra to form...

mechanism of degradation of paper. gas and water permeability, crystallization, density, molecular weight, melt flow index, etc (see equipment list on [1])...

heat sealing.[citation needed] LDPE and LLDPE have unique rheological or melt flow properties. LLDPE is less shear sensitive because of its narrower molecular...

Larson, K.; Saba, J.; Steffen, K. (2002). "Surface melt-induced acceleration of Greenland ice-sheet flow". Science. 297 (5579): 218–222. Bibcode:2002Sci...

A water year (also called hydrological year, discharge year or flow year) is a term commonly used in hydrology to describe a time period of 12 months for...

overland flow or terrestrial runoff) is the unconfined flow of water over the ground surface, in contrast to channel runoff (or stream flow). It occurs...

refractive index, but these indices often depend strongly upon the frequency of light, causing optical dispersion. Standard refractive index measurements...

crystal-liquid separation in this mush, large volumes of melt and crystals were carried upwards into a melt dominant magma body that formed at between 3.5–6 km...

mechanics, and engineering. In gas-liquid two-phase flow, the void fraction is defined as the fraction of the flow-channel volume that is occupied by the gas phase...

rocks. The caldera is surrounded by an outflow sheet of ash flow tuff (also called an ash flow sheet). If magma continues to be injected into the collapsed...

effect on the ice flow behind them. If ice shelves break up, the ice flow behind them may accelerate, resulting in increasing melt of the Antarctic ice...

temperatures of any of the minerals that can typically crystallize from the melt, and which are therefore the first to form solid crystals. Basalt often contains...

money. Gold's scarcity, its unique density and the way it could be easily melted, shaped, and measured made it a natural trading asset. Beginning in the...

Afghanistan, very low flow for the rest of the year. In contrast, if much of the melt is from glaciated or nearly glaciated areas, the melt continues through...