The truss rod is a component of a guitar or other stringed instrument that stabilizes the lengthwise forward curvature (also called relief) of the neck...

Some truss rod systems, called double action truss systems, tighten both ways, pushing the neck both forward and backward (standard truss rods can only...

A truss is an assembly of members such as beams, connected by nodes, that creates a rigid structure. In engineering, a truss is a structure that "consists...

A truss bridge is a bridge whose load-bearing superstructure is composed of a truss, a structure of connected elements, usually forming triangular units...

roasting Truss rod, a guitar part used to adjust the profile of its neck Timber roof truss, a common component of modern wood construction Truss head screw...

fret. High gloss lacquer finish. Truss rod adjustment location is on peg head at nut until 1980. After 1980 truss rod adjustment is located internally...

was made from a single piece of maple, without a separate fret board or truss rod. It was attached to the body with four screws and an anchor plate, unlike...

American Elite Tele uses a double action truss rod adjustment wheel located under the last fret instead of the truss rod adjustment on the headstock. Other...

may be replaced with iron rods and thus called a queen rod truss. This truss is often known as a palladiana (Palladian truss) in Italy, as it was frequently...

up rod or Rod in Wiktionary, the free dictionary. Look up ród, röd, rød, or roð in Wiktionary, the free dictionary. Rod, Ród, Rőd, Rød, Röd, ROD, or...

when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings...

the adjustment of the truss rod. Tightening the truss rod bends the neck backwards, lowering the action—and loosening the rod lets the neck bow forward...

enhancements were added to the guitar. The neck features a Historic-style truss-rod, rolled fingerboard edges, and is fretted over top of the binding. The...

differentiated by the truss rod cover. Japanese guitars have a two-screw truss rod cover whereas the Korean guitars have a three-screw truss rod cover (although...

tendency to bow in humid weather. Fender's reluctant addition of a metal truss rod into the necks of his guitars allowed for the much needed ability to fine-tune...

flat-wound, though many players replaced them with round-wounds), twin truss rods, triangle inlays, two single coil pickups, two volume and two tone dials...

bolt back plate with MicroTilt neck tilt or angle adjuster and "Bullet" truss rod nut; 1977–present, five way pickup selector switch. Despite being credited...

that of the Les Paul Custom Lite), and had "smart wood" written on the truss rod cover. The Studio SmartWood (LPEXMUGH1) was constructed from wood certified...

tuners with the Epiphone logo stamped on their backs, a differently shaped truss rod cover with "Gibson" printed vertically, black "speed" knobs, and "narrow-open...

(shaved, non-standard) ABR-1 Tune-o-matic bridge, chromed brass pickguard, truss rod cover plate and aluminum cover on the neck P-90 coil, Grover C-102 'Roto-matic...

have an adjustable truss rod. Some guitars, such as certain older Guild 12-strings, have two parallel truss rods. Turning the truss rod screw changes the...

aircraft of the time (Jet). This was the first Gretsch guitar to feature a truss rod accessible through the headstock, a pickup selection switch on the body...

guitar includes the guitar's frets, fretboard, tuners, headstock, and truss rod. The wood used to make the fretboard will usually differ from the wood...

neck in which the truss rod is adjusted at the bottom of the neck, while the later Japanese models have a 1970s-style 'bullet' truss rod, which is adjusted...

Solid Brass Tuner Buttons, 24 K Gold Plated Nut: 40mm Width Solid Brass Truss rod Cover: Solid Brass Headstock Front Inlays: Patent Statement Headstock...

base of the truss. The post can be replaced with an iron rod called a king rod (or king bolt) and thus a king rod truss. The king post truss is also called...

is adjustable by altering the tension on the steel truss rod inside the neck. Relaxing the truss rod allows the pull of the strings to increase the dip...

Hi-Fliers have a three-tone sunburst finish, pearloid white pickguard and truss rod cover. These very early Hi-Fliers are distinctly different from later...

neck fitted with 22 vintage-style frets, flat 9.5" radius and BiFlex truss-rod system,[failed verification] a "blocked" original American Vintage synchronized...

reads Deluxe at the top and L-5 for the model while the deco-shaped black truss rod cover is engraved Super L-5. Unlike later production examples the tailpiece...