ASTM International, formerly known as American Society for Testing and Materials, is a standards organization that develops and publishes voluntary consensus...

ASTM A325 is an ASTM International standard for heavy hex structural bolts, titled Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105...

ASTM A500 is a standard specification published by the ASTM for cold-formed welded and seamless carbon steel structural tubing in round, square, and rectangular...

test is one of the most widespread and long-established corrosion tests. ASTM B117 was the first internationally recognized salt spray standard, originally...

compostable under the traditional definition. In January 2011, the ASTM withdrew standard ASTM D 6002, which had provided plastic manufacturers with the legal...

Heat resistant steel castings per ASTM A297-1981 Grade Nominal alloy composition (%wt) Tensile strength, minimum Yield strength to 0.2%, minimum Elongation...

the United States. The A36 (UNS K02600) standard was established by the ASTM International. The standard was published in 1960 and has been updated several...

ASTM Distillation refers to a diverse group of different ASTM International standards. These different ASTM standards all use the distillation (volatility)...

discussed in the following standards: ASTM B209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate ASTM B210: Standard Specification for...

ASTM A992 steel is a structural steel alloy often used in the US for steel wide-flange and I beams. Like other carbon steels, the density of ASTM A992...

ASTM G132 Standard Test Method for Pin Abrasion Testing ASTM G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus ASTM G174...

ASTM F883 is a standard performance specification for padlocks. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM...

most common scales, using slightly different measurement systems, are the ASTM D2240 type A and type D scales. The A scale is for softer ones, while the...

The most common standard for stitches in the apparel industry is ASTM International ASTM D6193-16(2020) The standard also covers various types of seams...

graded SAND with silt and gravel." AASHTO Soil Classification System AASHTO ASTM International USDA Soil Taxonomy (Soil classification for agricultural purposes)...

2008. ASTM SI10-10, IEEE/ASTM SI 10 American National Standard for Metric Practice, ASTM International, West Conshohocken, PA, 2010, [www.astm.org] "The...

ASTM D8441 is an ASTM International standard defining the International Intoxicating Cannabinoid Product Symbol (IICPS). As of mid-2022, the symbol has...

Welded Pipe". www.astm.org. doi:10.1520/b0705-24. Retrieved 2024-10-17. "Standard Specification for Welded Nickel Alloy Tubes". www.astm.org. doi:10.1520/b0704-23...

the standard designation A242 (COR-TEN A) from the ASTM International standards group. Newer ASTM grades are A588 (COR-TEN B) and A606 for thin sheet...

Coatings. VSP. "ASTM D2197 - 98 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion NO_PDF". www.astm.org. "ASTM Standard for Pull-Off...

ASTM A572 steel is a common high strength, low alloy (HSLA) structural steel used in the United States. A572 steel properties are specified by ASTM International...

standard ASTM A305-49 was issued in 1949. The requirements for deformations found in current specifications for steel bar reinforcing, such as ASTM A615 and...

measurement is incorporated at either 20° (ISO 13803 / ASTM E430 method B) or at 20° and 60° ( ASTM D4039). There are however some manufacturers that offer...

ASTM F568M is an ASTM International standard for metric bolts, screws and studs that are used in general engineering applications. It is titled: Standard...

ASTM D5585-95, 2001, Standard Table of Body Measurements for Adult Female ASTM D6829-02, 2008, Standard Tables of Body Measurements for Juniors ASTM D5585-11...

ASTM A490 and ASTM A490M are ASTM International standards for heavy hex structural bolts made from alloy steel. The imperial standard is officially titled...

nonferrous, electrically conducting wire. Dimensions of the wires are given in ASTM standard B 258. The cross-sectional area of each gauge is an important factor...

original on November 28, 2014. Retrieved May 22, 2013. "ASTM D910". West Conshohocken, PA, USA: ASTM International. Archived from the original on April 2...

engineering/manufacturing application. The ASTM has several procedures for evaluating measurement systems and test methods, including: ASTM E2782 - Standard Guide for...

316 stainless steel. 316L in particular is biocompatible when produced to ASTM F138 / F139. It is a common choice for biomedical implants, as well as body...