The SNECMA Turbomeca Larzac is a military turbofan manufactured by GRTS (Groupement Turbomeca-SNECMA), a consortium between the two French companies, SNECMA...

Rolls-Royce Turbomeca Limited (RRTM) is a joint venture between British aero-engine manufacturer Rolls-Royce plc (UK) and French helicopter engine specialist...

The Rolls-Royce Turbomeca Adour is a two-shaft low bypass turbofan aircraft engine developed by Rolls-Royce Turbomeca Limited, a joint venture between...

better efficiency than the CFM LEAP. SNECMA Coleoptere SNECMA Atar SNECMA M53 SNECMA M88 SNECMA Turbomeca Larzac EuroProp TP400-D6 (as part of Europrop...

Eurotrainer". Each of these proposals were to be powered by twin SNECMA Turbomeca Larzac turbofan engines. The German Air Force insisted that the trainer...

The Rolls-Royce/Snecma Olympus 593 was an Anglo-French turbojet with reheat, which powered the supersonic airliner Concorde. It was initially a joint project...

The Turbomeca Astazou is a highly successful series of turboprop and turboshaft engines, first run in 1957. The original version weighed 110 kg (243 lb)...

Helicopter Engines. "Turbomeca buy gives Snecma a foothold in turboshaft market". Aviation Week. Sep 4, 2000. p. 30. "New Turbomeca engine to power India's...

The Turbomeca Marboré is a small turbojet engine that was produced by Turbomeca from the 1950s into the 1970s. The most popular uses of this engine were...

project. One issue was French insistence that the aircraft be powered by the SNECMA M88, in development at the same time as the XG-40. The Eurojet consortium...

The Rolls-Royce Turbomeca RTM322 is a turboshaft engine currently produced by Safran Helicopter Engines. The RTM322 was originally conceived and manufactured...

The Turbomeca TM 333 is a turboshaft engine manufactured by French company Turbomeca and designed for helicopters weighing 4-5 tonnes. It first ran in...

the SNECMA Turbomeca Larzac engine, with 14.1 kN of thrust, as under-powered. In response, in August 2005, HAL reached a deal to replace the SNECMA engine...

The Turbomeca Arrius is one of a family of turboshaft engines for helicopter use, first produced in 1981. As of 2012, some 2,700 units had been sold....

SaM146 is a turbofan engine produced by the PowerJet joint venture between Snecma (Safran) of France and NPO Saturn of Russia. Developing 68–80 kN (15,000–18...

The Turbomeca Makila is a family of French turboshaft engines for helicopter use, first run in 1976 and flown in 1977. Typical power output is around...

competition in February 2002, because the engine core, which is based on the Snecma M88 turbofan fighter engine, was too heavy and used too much fuel. By May...

Safran Helicopter Engines, previously known as Turbomeca, is a French manufacturer of low- and medium-power gas turbine turboshaft engines for helicopters...

The Turbomeca Arriel is a series of French turboshaft engines that first ran in 1974. Delivering 650 to 1,000 hp (480 to 750 kW), over 12,000 Arriel engines...

Rolls-Royce/MAN Turbo RB.153 RB.193 Rolls-Royce/Snecma M45H Rolls-Royce Turbomeca: Adour Snecma/Turbomeca Larzac Turbo-Union RB199 ATEC T900 Avco/Pratt & Whitney...

MTU Turbomeca Rolls-Royce GmbH (MTR) is a multinational engine manufacturer established to develop, manufacture, and service the MTR390 turboshaft engine...

The Rolls-Royce/SNECMA M45H is an Anglo-French medium bypass ratio turbofan produced specifically for the twin-engined VFW-Fokker 614 aircraft in the early...

The Turbomeca Gabizo was a small turbojet engine produced by Turbomeca from the 1950s. The components were designed to take the stresses of high-speed...

The Turbomeca Aspin was a small French turbofan engine produced by Turbomeca in the early 1950s. This geared turbofan design was the first turbofan to...

The Turbomeca Artouste is an early French turboshaft engine, first run in 1947. Originally conceived as an auxiliary power unit (APU), it was soon adapted...

The Turbomeca Astafan is a single-spool, variable-pitch turbofan engine developed from the Turbomeca Astazou.: 553 : 932  Despite successful flight-testing...

Rolls-Royce/MAN Turbo RB.153 RB.193 Rolls-Royce/Snecma M45H Rolls-Royce Turbomeca: Adour Snecma/Turbomeca Larzac Turbo-Union RB199 ATEC T900 Avco/Pratt & Whitney...

Rolls-Royce/MAN Turbo RB.153 RB.193 Rolls-Royce/Snecma M45H Rolls-Royce Turbomeca: Adour Snecma/Turbomeca Larzac Turbo-Union RB199 ATEC T900 Avco/Pratt & Whitney...

The MTU Turbomeca Rolls-Royce MTR390 is a turboshaft developed for light helicopter applications by MTU Turbomeca Rolls-Royce (MTR). The engine is designed...

The Turbomeca Aubisque was a small turbofan engine designed and produced by Turbomeca in the 1960s. Its only application was the Saab 105 military trainer...