1,2,4-Trichlorobenzene
| |||
Names | |||
---|---|---|---|
Preferred IUPAC name 1,2,4-Trichlorobenzene | |||
Identifiers | |||
3D model (JSmol) | |||
ChEBI | |||
ChemSpider | |||
ECHA InfoCard | 100.004.026 | ||
PubChem CID | |||
UNII | |||
CompTox Dashboard (EPA) | |||
| |||
| |||
Properties | |||
C6H3Cl3 | |||
Molar mass | 181.44 g·mol−1 | ||
Appearance | Colorless liquid | ||
Odor | aromatic[1] | ||
Density | 1.46 g cm−3 | ||
Melting point | 16.9 °C (62.4 °F; 290.0 K) | ||
Boiling point | 213.5 °C (416.3 °F; 486.6 K)[2] | ||
0.003% (20 °C)[1] | |||
Vapor pressure | 1 mmHg (20 °C)[1] | ||
Related compounds | |||
Related compounds | 1,2,3-Trichlorobenzene 1,3,5-Trichlorobenzene | ||
Hazards | |||
Flash point | 110 °C (230 °F; 383 K) | ||
Explosive limits | 2.5%-6.6% (150°C)[1] | ||
NIOSH (US health exposure limits): | |||
PEL (Permissible) | none[1] | ||
REL (Recommended) | C 5 ppm (40 mg/m3)[1] | ||
IDLH (Immediate danger) | N.D.[1] | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). |
1,2,4-Trichlorobenzene is an organochlorine compound, one of three isomers of trichlorobenzene. It is a derivative of benzene with three chloride substituents. It is a colorless liquid used as a solvent for a variety of compounds and materials.
Production and uses
[edit]Depending on the conditions and additives (e.g., sulfur), it can be the main product from the chlorination of benzene. It is virtually the exclusive product from the chlorination of 1,4-dichlorobenzene. It is also the main product from the dehydrochlorination of hexachlorocyclohexane.[3]
It is useful as a high-temperature solvent, e.g. for GPC of polyolefines such as PE or PP which are otherwise insoluble.
Aside from its use as a solvent, this compound is a useful precursor to dye and pesticides.
Safety
[edit]The LD50 (oral, rats) is 756 mg/kg. Animal studies have shown that 1,2,4-trichlorobenzene affects the liver and kidney, and is possibly a teratogen.[4] There is no regulated occupational exposure limit for chemical exposure, but the National Institute for Occupational Safety and Health recommends no greater exposure than 5 ppm, over an 8-hour workday.
See also
[edit]- Chlorobenzenes—different numbers of chlorine substituents and isomeric forms
References
[edit]- ^ a b c d e f g NIOSH Pocket Guide to Chemical Hazards. "#0627". National Institute for Occupational Safety and Health (NIOSH).
- ^ Jaw, Ching-Guang; Chen, I-Ming; Yen, Jui-Hung; Wang, Yei-Shung (December 1999). "Partial solubility parameters of chlorobenzene and chlorophenol compounds at equilibrium distribution in two immiscible phases". Chemosphere. 39 (15): 2607–2620. doi:10.1016/s0045-6535(99)00173-3. ISSN 0045-6535.
- ^ Beck, U.; Löser, E. "Chlorinated Benzenes and other Nucleus-Chlorinated Aromatic Hydrocarbons". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.o06_o03. ISBN 978-3527306732.
- ^ CDC - NIOSH Pocket Guide to Chemical Hazards