French
Deutsch2-Vinylpyridine
 | |
| Names | |
|---|---|
| Preferred IUPAC name 2-Ethenylpyridine | |
| Other names 2-Vinylpyridine 2VP | |
| Identifiers | |
3D model (JSmol) | |
| 104505 | |
| ChemSpider | |
| ECHA InfoCard | 100.002.618 |
| EC Number |
|
PubChem CID | |
| RTECS number |
|
| UNII | |
| UN number | 3073 |
CompTox Dashboard (EPA) | |
| |
| |
| Properties | |
| C7H7N | |
| Molar mass | 105.140 g·mol−1 |
| Appearance | colorless liquid |
| Density | 0.977 g/cm3 |
| Melting point | −50 °C (−58 °F; 223 K) |
| Boiling point | 158 °C (316 °F; 431 K) |
| 27.5 g/L | |
| Vapor pressure | 96 hPa (72 mmHg) at 100 °C |
| Acidity (pKa) | 4.98 |
| Viscosity | 1.17 mPas |
| Hazards | |
| GHS labelling: | |
     | |
| Danger | |
| H226, H301, H302, H311, H314, H317, H331, H411 | |
| P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P272, P273, P280, P301+P310, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P311, P312, P321, P322, P330, P333+P313, P361, P363, P370+P378, P391, P403+P233, P403+P235, P405, P501 | |
| Flash point | 48 °C (118 °F; 321 K) |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
2-Vinylpyridine is an organic compound with the formula CH2CHC5H4N. It is a derivative of pyridine with a vinyl group in the 2-position, next to the nitrogen. It is a colorless liquid, although samples are often brown. It is used industrially as a precursor to specialty polymers and as an intermediate in the chemical, pharmaceutical, dye, and photo industries.[1] Vinylpyridine is sensitive to polymerization. It may be stabilized with a polymerisation inhibitor such as tert-butylcatechol. Owing to its tendency to polymerize, samples are typically refrigerated.
Synthesis
[edit]It was first synthesized in 1887. A contemporary preparation entails condensation of 2-methylpyridine with formaldehyde, followed by dehydration of the intermediate alcohol. The reaction is carried out between 150–200 °C in an autoclave. The conversion is kept relatively low. After removal of unreacted 2-methylpyridine by distillation, concentrated aqueous sodium hydroxide is added to the residue and the resultant mixture is distilled under reduced pressure. During distillation, the dehydration of 2-(2-pyridyl)ethanol occurs to give 2-vinylpyridine, which can be purified further by fractional distillation under reduced pressure in the presence of an inhibitor such as 4-tert-butylcatechol.[1]
- CH3C5H4N + CH2O → HOCH2CH2C5H4N
- HOCH2CH2C5H4N → CH2=CHC5H4N + H2O
An alternative synthesis involves the reaction of acrylonitrile and acetylene below 130–140 ̊C in the presence of organocobalt compounds as a catalyst.[1] Acrylonitrile is the solvent for the reaction.[2]
Uses
[edit]Polymeric derivatives
[edit]2-Vinylpyridine is readily polymerized or copolymerized with styrene, butadiene, isobutylene, methyl methacrylate, and other compounds in the presence of radical, cationic, or anionic initiators. The homopolymer is soluble in organic solvents such as methanol and acetone, whereas cross-linked copolymers are insoluble in organic solvents.
An important application of 2-vinylpyridine involves the production of a latex terpolymer of 2-vinylpyridine, styrene, and butadiene, for use as a tire-cord binder. The tire cord is treated first with a resorcinol-formaldehyde polymer and then with a terpolymer made from 15% 2-vinylpyridine, styrene, and butadiene. This treatment gives the close bonding of tire cord to rubber.
2-Vinylpyridine is a co-monomer for acrylic fibers. Between 1–5% of copolymerized 2-vinylpyridine provide the reactive sites for dyes.[2]
Organic synthesis
[edit]Due to the electron-withdrawing effect of the ring nitrogen atom, 2-vinylpyridine adds nucleophiles such as methoxide, cyanide, hydrogen sulfide at the vinylic site to give addition products. The addition product of methanol to 2-vinylpyridine, 2-(2-methoxyethyl)pyridine is a veterinary anthelmintic.[1]
Treating 2-vinylpyridine with 4-pyridinecarbonitrile and hydrogen chloride gives 1-[2-(2-pyridyl)ethyl]-4-cyanopyridinium chloride, which then can be used to prepare dimethylaminopyridine (DMAP), a widely used base catalyst.
2-Vinylpyridine is used in the production of Axitinib, a pharmaceutical.
See also
[edit]References
[edit]- ^ a b c d Shimizu, Shinkichi; Watanabe, Nanao; Kataoka, Toshiaki; Shoji, Takayuki; Abe, Nobuyuki; Morishita, Sinji; Ichimura, Hisao (2007). "Pyridine and Pyridine Derivatives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a22_399. ISBN 978-3527306732.
- ^ a b Bönnemann, H.; Brijoux, W.. Transition Metals for Organic Synthesis: Building Blocks and Fine Chemicals. 2008, p. 188