2MV

2MV
ManufacturerOKB-1
Country of originSoviet Union
OperatorSoviet Space Program
← 1MV 3MV

The 2MV planetary probe (short for 2nd generation Mars-Venus) is a designation for a common design used by early Soviet uncrewed probes to Mars and Venus.[1]

It was an incremental improvement of earlier 1MV probes and was used for the Venera 5 and Venera 6 missions to Venus.[1][2] It was standard practice of the Soviet space program to use standardized components as much as possible.

All probes shared the same general characteristics and differed only in equipment necessary for specific missions.[3] Each probe also incorporated improvements based on experience with earlier missions.

It was superseded by the 3MV family.

Design

[edit]

The probe consisted of three primary parts.

Orbital Compartment

[edit]

The core of the stack was a pressurized compartment called the Orbital Compartment measuring 2.1 meters with a diameter of 1.1 meters. Also mounted on the Orbital Compartment was a parabolic high-gain antenna, used for long-range communications.

Payloads

[edit]

Depending on the mission, the probe would carry specific instruments or a detachable landing module.[3]

Engine

[edit]

Course correction capabilities were provided by a KDU-414 engine attached to the top of the Orbital Compartment.

Variants

[edit]

See also

[edit]

References

[edit]
  1. ^ a b "2MV". www.astronautix.com. Archived from the original on 8 March 2016.
  2. ^ a b "Venera 5, 6 (V-69 #1, 2)". Gunter's Space Page. Retrieved 2023-09-25.
  3. ^ a b Ulivi, Paolo; Harland, David M. (2007-12-08). Robotic Exploration of the Solar System: Part I: The Golden Age 1957-1982. Springer. ISBN 9780387739830.
  4. ^ "Venera (2a), (2b) (2MV-1 #1, 2)". Gunter's Space Page. Retrieved 2023-09-25.
  5. ^ "Venera (2c) (2MV-2 #1)". Gunter's Space Page. Retrieved 2023-09-25.
  6. ^ "Mars 1 (2MV-4 #1, 2)". Gunter's Space Page. Retrieved 2023-09-25.
  7. ^ "Mars (2a) (2MV-3 #1)". Gunter's Space Page. Retrieved 2023-09-25.