D-Terminal

You can help expand this article with text translated from the corresponding article in Japanese. (November 2011) Click [show] for important translation instructions. View a machine-translated version of the Japanese article. Machine translation, like DeepL or Google Translate, is a useful starting point for translations, but translators must revise errors as necessary and confirm that the translation is accurate, rather than simply copy-pasting machine-translated text into the English Wikipedia. Do not translate text that appears unreliable or low-quality. If possible, verify the text with references provided in the foreign-language article. You must provide copyright attribution in the edit summary accompanying your translation by providing an interlanguage link to the source of your translation. A model attribution edit summary is Content in this edit is translated from the existing Japanese Wikipedia article at [[:ja:D端子]]; see its history for attribution. You may also add the template {{Translated|ja|D端子}} to the talk page. For more guidance, see Wikipedia:Translation.

D Video connector

A D-Terminal jack.
Type	Analogue video connector
Production history
Designer	EIAJ (Electronic Industry Association of Japan)
Designed	Late 1990s
Produced	Late 1990s to present
Superseded	RCA connectors
General specifications
Audio signal	device-dependent
Video signal	Analogue component video, 480i, 480p, 720p, 1080i, 1080p
Pins	14 (6 video, 3 reserved, 2 detect, 3 data)
Data
Data signal	Resolution and Aspect ratio information
Pinout
A female connector seen from the front.
Pin 1	Y	luminance (0.7 V, 75 Ω)
Pin 2	Y GND	Y ground
Pin 3	PB	0.35 V, 75 Ω
Pin 4	PB GND
Pin 5	PR	0.35 V, 75 Ω
Pin 6	PR GND
Pin 7		Reserve link 1
Pin 8	Data line 1	0 V = 525 lines 2.2 V = 750 lines 5 V = 1125 lines
Pin 9	Data line 2	0 V = 59.94i / 60i 5 V = 59.94p / 60p
Pin 10		Reserve link 2
Pin 11	Data line 3	0 V = 4:3 2.2 V = 4:3 letterbox 5 V = 16:9
Pin 12	Plug insert detect ground
Pin 13		Reserve link 3
Pin 14	Plug insert detect	output 10 kΩ, input > 100 kΩ
Hooks	GND	Shell ground

The D-Terminal or D-tanshi (Ｄ端子) is a type of analog video connector found on Japanese consumer electronics, typically HDTV, DVD, Blu-ray, D-VHS and HD DVD devices. It was developed by the EIAJ (Electronic Industry Association of Japan) in its standard, RC-5237, for use in digital satellite broadcast tuners. In appearance it is a small flat trapezoidal connector, the same connector as the AAUI connector used by Apple Computer for some time to connect to ethernet.

Some items sold outside Japan use the connector as well. Notable examples are Canon's XH-A1 DVC high-definition camcorder and Panasonic's AG-HVX200 DVCPro HD camcorder.

A D-Terminal connector carries a component video signal (YP_BP_R). A device with a D5 connector can understand and display the following video signals:

• D1 480i0p (525i)： 00p720 × 480 interlaced
• D2 480p0i (525p)： 00i720 × 480 progressive
• D3 1080ip (1125i)： p1920 × 1080 interlaced
• D4 720p0i (750p)： 0i1280 × 720 progressive
• D5 1080pi (1125p)： i1920 × 1080 progressive

A device with a D-Terminal connector supports that level and lower D-Terminal signal. For example, a D4 connector can be used with a D4, D3, D2, or D1 signal, but not with a D5 signal.

It is possible to use a simple breakout cable to connect a D-Terminal connector to a standard 3 RCA jack or BNC component connection.^[1]

It is not always a given that output devices support all lower versions of the standard, so customers must take care to buy compatible products. For example, the PlayStation Portable (PSP-2000) initially supported only the 480p (D2) mode. System Software Ver. 5.00 added 480i (D1) support for the "PS one Classics" games, but not native PSP games. The later PSP-3000 and PSP Go models have 480i support for all games.

• Amphenol connector
• D-subminiature
• SCART
• EIAJ 8 pin connector [ja]

• Q&A - No.31999/10 What Is a "D-Terminal"? - A new terminal standard for connecting digital satellite tuners with TV sets.
• D-Terminal to Component adapter cable