De Hondsrug, Weerdinge

De Hondsrug, Weerdinge
De Hondsrug, January 2009
Map
Origin
Mill nameDe Hondsrug
Mill locationIJsspoorweg 33, 7814 XA Weerdinge
Coordinates52°49′11″N 6°55′20″E / 52.81972°N 6.92222°E / 52.81972; 6.92222
Operator(s)Private
Year built1910
Information
PurposeCorn mill
TypeSmock mill
StoreysTwo-storey smock
Base storeysTwo-storey base
Smock sidesEight sides
No. of sailsFour sails
Type of sailsCommon sails
WindshaftCast iron
WindingTailpole and winch
No. of pairs of millstonesOne pair
Size of millstones1.50 metres (4 ft 11 in)

De Hondsrug is a smock mill in Weerdinge, Drenthe, which has been restored to working order. The mill was built in 1910 and is listed as a Rijksmonument, number 14964.[1]

History

[edit]

The first windmill on this site was built in 1863. It ground buckwheat and rye. The mill burnt down on 4 June 1870. A new mill was built to replace it but was burnt down in 1909. To replace that mill, the drainage mill Flikkezijlsterpoldermolen was moved from Farmsum, Groningen by millwright Van Ausselt of Coevorden. Repairs were made to the mill in 1938 and the following year the sails were fitted with streamlined leading edges. In 1945, the mill lost a pair of sails and ceased work. It was restored in 1988.[2] A new cap and sails were made and fitted, and the mill rethatched. The mill was then named De Hondsrug, having previously been nameless.[3] It is named after a ridge of sandhills in Groningen.[4]

Description

[edit]

De Hoop is what the Dutch describe as an "achtkante beltmolen". It is a two-storey smock mill on a two-storey brick base. There is no stage, a bank of earth thrown up against the lower storey of the base provides access to the sails. The smock and cap are thatched. The mill is winded by a tailpole and winch. The four Common sails have a span of 22.00 metres (72 ft 2 in) and are carried in a cast-iron windshaft which was cast by Prins van Oranje, The Hague in 1896. The windshaft also carries the brake wheel, which has 59 cogs. This drives the wallower (31 cogs) at the top of the upright shaft. At the bottom of the upright shaft, the great spur wheel, which has 108 cogs, drives the 1.50-metre-diameter (4.9 ft) French Burr stones via a lantern pinion stone nut with 33 staves.[1]

Public access

[edit]

De Hondsrug is open to the public by appointment.[5]

References

[edit]
  1. ^ a b "Technische gegevens" (in Dutch). De Hollandsche Molen. Archived from the original on 3 March 2016. Retrieved 23 October 2009. (Click on "Technische gegevens" to view.)
  2. ^ "Geschiedenis" (in Dutch). De Hollandsche Molen. Archived from the original on 3 March 2016. Retrieved 23 October 2009. (Click on "Geschiedenis" to view.)
  3. ^ "Wachtum, Drenthe" (in Dutch). Molendatabase. Retrieved 23 October 2009.
  4. ^ See nl:Hondsrug (in Dutch)
  5. ^ "Informatie" (in Dutch). De Hollandsche Molen. Archived from the original on 3 March 2016. Retrieved 23 October 2009. (Click on "Informatie" to view.)