Electron-coupled oscillator
![]() | This article may be too technical for most readers to understand.(May 2024) |
![](http://upload.wikimedia.org/wikipedia/en/thumb/6/67/ECO_oscillator_circuit.png/220px-ECO_oscillator_circuit.png)
In the vacuum-tube radio, an electron-coupled oscillator or ECO oscillator uses a screen-grid tube with the cathode, control grid and screen grid forming the elements of the frequency-generating circuit while the plate is in the output circuit, shielded from the oscillator circuit proper by the screen grid. The ECO oscillator is practically impervious to rather drastic variations in its load circuit. The variation in the heater-cathode capacity with temperature changes tends to compensate for other capacity-temperature effects, with the result that the frequency creep during warming-up is less than is usual with the same tubes in more conventional circuits.[1][2] The ECO oscillator was used for shortwave superhet radios.
References
[edit]- ^ Lamb, James J. (April 1932). "Stabilizing Superheterodyne Performance: Electron-Coupled Oscillators Using Heater-Type Tubes" (PDF). QST: 14–17.
This article incorporates text from this source, which is in the public domain.
- ^ "LC Oscillators in Radios". Electronix and More. Retrieved 2024-01-19.
Sources
[edit]- Gottlieb, I. (1997). "The electron-coupled oscillator". Practical Oscillator Handbook. Elsevier Science. pp. 140–142. ISBN 978-0-08-053938-6. Retrieved 2024-05-10.