LaTeX circuit diagram of a general domino logic implementation.
\documentclass{article} \usepackage{circuitikz} \begin{document} \begin{center} \begin{circuitikz}[american voltages] \ctikzset{tripoles/mos style/arrows} \ctikzset{logic ports/scale=0.6} \ctikzset{blocks/scale=2} \usetikzlibrary{automata,positioning} \draw (0, 6.9) node[vdd]{$V_{DD}$} (0,6.5) node [pmos]{$M_1$} (0,2.25) node [nmos]{$M_2$} (-1, 6.5) node[ocirc]{\hspace{-2.5em}CLK} (-1, 2.25) node[ocirc]{\hspace{-2.5em}CLK} (0, 5.75) to (0, 5) (0, 5.5) to (0.9, 5.5) (1.5, 5.5) to (2.3, 5.5) node[circ]{\hspace{0.5em}Y} (1.25,5.5) node[not port, xscale=1.1] (not) {} (0, 1.5) node[ground]{} (-2, 4.75)node[circ]{\hspace{-2em}$N_1$} to (-1, 4.75) (-2, 4.25)node[circ]{\hspace{-2em}$N_2$} to (-1, 4.25) (-2, 3.25)node[circ]{\hspace{-2em}$N_n$} to (-1, 3.25) (0,4) node[twoportshape](start){\begin{tabular}{c}\vspace{0.5em} Pull-Down\\\vspace{-2em} Network \end{tabular}}; (0, 5.5) to (start.north) ; \draw [loosely dotted](-1.75,4) -- (-1.75,3.5); \end{circuitikz} \end{center} \end{document}