DescriptionHigh frequency inductance experiment 1906.jpg
English: Experiment by high voltage expert Earle Ovington at the December 1906 electric trade show at Madison Square Garden, New York City, reported by Archie Frederick Collins, demonstrating that high frequency currents behave differently from ordinary DC or low frequency AC current. The output terminals of a Tesla coil are connected to a copper bar with a U shaped bend in it. The bar has negligible resistance so at low frequencies the current would flow through it, leaving the light unlit. However at radio frequency the bend gives the bar enough inductive reactance that there is a potential difference of hundreds of volts across it, and the current instead flows through the higher resistance of the incandescent lamp's filament, lighting it. At the turn of the century this counterintuitive behavior was startling to electrical engineers, who were more familiar with DC and low frequency AC currents.
Caption: LIGHTING AN INCANDESCENT LAMP SHORT-CIRCUITED WITH HEAVY COPPER The current has the choice of two paths - an easy one through the copper bar, and a higher resistance one through the lamp - and it chooses the latter. Ordinary current would take the easier path
This media file is in the public domain in the United States. This applies to U.S. works where the copyright has expired, often because its first publication occurred prior to January 1, 1929, and if not then due to lack of notice or renewal. See this page for further explanation.
United States
This image might not be in the public domain outside of the United States; this especially applies in the countries and areas that do not apply the rule of the shorter term for US works, such as Canada, Mainland China (not Hong Kong or Macao), Germany, Mexico, and Switzerland. The creator and year of publication are essential information and must be provided. See Wikipedia:Public domain and Wikipedia:Copyrights for more details.