File:SLS Liquid Oxygen Tank Hardware in Welding.jpg

Original file (4,912 × 7,360 pixels, file size: 28.83 MB, MIME type: image/jpeg)

This is a file from the Wikimedia Commons. Information from its description page there is shown below.
Commons is a freely licensed media file repository. You can help.

Summary

Description	English: Precision Meets Progress in Welding on SLS Liquid Oxygen Tank Hardware A liquid oxygen tank confidence article for NASA's new rocket, the Space Launch System, completes final welding on the Vertical Assembly Center at Michoud Assembly Facility in New Orleans. This is the first glimpse of what one of the two tanks will look like that make up the SLS core stage. Towering more than 200 feet tall with a diameter of 27.6 feet, the core stage will store cryogenic liquid hydrogen and liquid oxygen that will feed the vehicle’s RS-25 engines. Confidence hardware verifies weld procedures are working as planned and tooling-to-hardware interfaces are correct. It will also be used in developing the application process for the thermal protection system, which is the insulation foam that gives the tank its orange color. The liquid oxygen tank is the smaller of the two tanks in the core stage. Components of the liquid hydrogen tank confidence article completed welding in February at Michoud. All welding for the SLS core stage for the Block I configuration of the rocket -- including confidence, qualification and flight hardware -- will be done this summer in preparation for its first flight with NASA's Orion spacecraft in 2018.
Date	Taken on 16 March 2016, 13:03 (according to Exif data)
Source	https://www.nasa.gov/exploration/systems/sls/multimedia/progress-in-welding-on-sls-liquid-oxygen-tank.html (direct link)
Author	NASA/Michoud/Steve Seipel

Licensing

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	21:27, 31 January 2021		4,912 × 7,360 (28.83 MB)	Ras67	original resolution
	17:43, 26 January 2017		1,041 × 1,560 (482 KB)	Ras67	== {{int:filedesc}} == {{Information \|Description={{en\|1=Precision Meets Progress in Welding on SLS Liquid Oxygen Tank Hardware * A liquid oxygen tank confidence article for NASA's new rocket, the Space Launch System, completes final welding on the Ver...

File usage

The following page uses this file:

Michoud Assembly Facility

Global file usage

The following other wikis use this file:

Usage on tr.wikipedia.org
- Michoud Montaj Tesisi

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Image title	A liquid oxygen tank confidence article for NASA's new rocket, the Space Launch System, completes final welding on the Vertical Assembly Center at Michoud Assembly Facility in New Orleans.
Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D800
Author	NASA/MAF/Steven Seipel
Copyright holder	For copyright and restrictions refer to _ Http://www.nasa.gov/multimedia/guidelines/index.html
Exposure time	1/160 sec (0.00625)
F-number	f/2.8
ISO speed rating	1,250
Date and time of data generation	13:03, 16 March 2016
Lens focal length	24 mm
Label	Liquid oxygen tank confidence weld complete on VAC
Headline	Liquid oxygen tank confidence weld complete on VAC
Short title	Liquid oxygen tank confidence weld complete on VAC
Usage terms	Released to the public
Orientation	Normal
Horizontal resolution	300 dpi
Vertical resolution	300 dpi
Software used	Adobe Photoshop Lightroom 6.0 (Macintosh)
File change date and time	09:29, 18 March 2016
Exposure Program	Manual
Exif version	2.3
Date and time of digitizing	13:03, 16 March 2016
Shutter speed	7.321928
APEX aperture	2.970854
Exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Spot
Light source	Unknown
Flash	Flash did not fire, compulsory flash suppression
Color space	sRGB
Focal plane X resolution	2,048.4022216797
Focal plane Y resolution	2,048.4022216797
Focal plane resolution unit	3
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Manual exposure
White balance	Manual white balance
Digital zoom ratio	1
Focal length in 35 mm film	24 mm
Scene capture type	Standard
Scene control	High gain up
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown
Serial number of camera	3062649
Lens used	24.0-70.0 mm f/2.8
Rating (out of 5)	1
Date metadata was last modified	04:32, 18 March 2016
Category	SLS
Unique ID of original document	495F2366530392AE83E154C3A3E30620
Keywords	Cell A LOX MAF NASA SLS VAC
IIM version	4

Retrieved from "https://en.wikipedia.org/wiki/File:SLS_Liquid_Oxygen_Tank_Hardware_in_Welding.jpg"

File:SLS Liquid Oxygen Tank Hardware in Welding.jpg

Summary

Licensing

Captions

Items portrayed in this file

depicts

copyright status

public domain

inception

16 March 2016

captured with

Nikon D800

exposure time

0.00625 second

f-number

2.8

focal length

24 millimetre

ISO speed

1,250

media type

image/jpeg

instance of

photograph

File history

File usage

Global file usage

Metadata