French
DeutschFile:Spray lay-up process.png
Size of this preview: 800 × 486 pixels. Other resolutions: 320 × 194 pixels | 640 × 389 pixels | 1,024 × 622 pixels | 1,400 × 850 pixels.
Original file (1,400 × 850 pixels, file size: 85 KB, MIME type: image/png)
 | This is a file from the Wikimedia Commons. Information from its description page there is shown below. Commons is a freely licensed media file repository. You can help. |
Summary
| Description | English: Spray_lay-up_process. 1 Mold. 2 Release agent. 3 Gelcoat. 4 Deposit fiber resin mixture. 5 Rolling. (removing air for good fiber wetting). 6 Trimming. A Supply resin (A component). B Supply resin (B component). Supply air pressure. D Supply fiber. E Spray-up / Chopper gun. Nederlands: Sproeilamineren. 1 Mal. 2 Losmiddel. 3 Gelcoat. 4 Sproeien glas + hars. 5 Rollen (lucht verwijderen en bevochtigen vezels) 6 Afkorten zijkanten. |
| Date | |
| Source | Own work |
| Author | LaurensvanLieshout |
Licensing
I, the copyright holder of this work, hereby publish it under the following licenses:
 | Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License. |
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported, 2.5 Generic, 2.0 Generic and 1.0 Generic license.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
You may select the license of your choice.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 05:47, 26 August 2009 | | 1,400 × 850 (85 KB) | LaurensvanLieshout | {{Information |Description={{en|1=Spray_lay-up_process. 1 Mold. 2 Release agent. 3 Gelcoat. 4 Deposit fiber resin mixture. 5 Rolling. (removing air for good fiber wetting). 6 Trimming. A Supply resin (A component). B Supply resin (B component). Supply a |
File usage
The following page uses this file:
Global file usage
The following other wikis use this file:
- Usage on fa.wikipedia.org
- Usage on fr.wikipedia.org
- Usage on nl.wikipedia.org
- Usage on www.wikidata.org
