File:Triode-english-text.svg

Original file (SVG file, nominally 669 × 890 pixels, file size: 279 KB)

Summary

Description
Català: Dibuix seccionat que mostra l'estructura d'un triode de baixa potència en un tub de buit. El tríode, inventat el 1906 per Lee De Forest, va ser el primer dispositiu que podia amplificar i es va utilitzar àmpliament en ràdios, televisors i sistemes d'àudio i transmissors de ràdio fins que va ser substituït en gran part pel transistor als anys 60.
Svenska: triod
English: Cutaway drawing showing the construction of a low power triode vacuum tube. The triode, invented in 1906 by Lee De Forest, was the first device which could amplify and it was used widely in radios, televisions, audio systems and radio transmitters until it was largely replaced by the transistor in the 1960s.
It consists of an evacuated glass tube containing three concentric electrodes: a cathode heated by a filament, a grid, and a plate. The three outer electrodes are shown with part cut away to reveal the construction. The cathode is a narrow metal tube down the center, containing the filament, a loop of high resistance nichrome wire with a separate current passing through it to heat. It heats the cathode red hot (800-1000° C). The heat causes the cathode to release electrons into the vacuum inside the tube. The cathode is coated with alkaline earth oxides such as calcium oxide or thorium to reduce it's work function, to increase the electron production. The negative electrons are attracted to the positive voltage on the plate, a cylinder of sheet metal surrounding the cathode, and travel to it, creating an electric current from the cathode to the plate. The grid is a screen or helix of wires between cathode and plate. The electrons have to pass through the grid wires to get to the plate. A voltage applied between the grid and cathode can control the cathode-plate current. A negative voltage on the grid will repel some of the electrons, so fewer get through to the plate, reducing the plate current. A positive voltage on the grid will attract more electrons through, increasing the plate current. Thus a small voltage on the grid can control a much larger plate current, which can be used to amplify. Almost all the air is evacuated from the sealed glass envelope, to about 10-9 atm, so the electrons will not be obstructed by gas atoms. The parts inside the tube are supported by wires which connect the electrodes to pins on the bottom of the tube. A thin shiny spot of barium metal (not shown) is evaporated onto the glass during manufacture. This is called a getter and helps maintain the vacuum by absorbing residual gas released by the metal parts after evacuation.
Date
Source Own work
Author Svjo
Other versions
Other related versions:[edit]

.svg:

.png:

.jpg:

Translate this file This SVG file contains embedded text that can be translated into your language, using any capable SVG editor, text editor or the SVG Translate tool. For more information see: About translating SVG files.
This file is translated using SVG <switch> elements. All translations are stored in the same file! Learn more.

For most Wikipedia projects, you can embed the file normally (without a lang parameter). The Wikipedia will use its language if the SVG file supports that language. For example, the German Wikipedia will use German if the SVG file has German. To embed this file in a particular language use the lang parameter with the appropriate language code, e.g. [[File:Triode-english-text.svg|lang=en]] for the English version. Do not specify a lang parameter if it is not needed. The parameter may prevent the use of a subsequent translation.

To translate the text into your language, you can use the SVG Translate tool. Alternatively, you can download the file to your computer, add your translations using whatever software you're familiar with, and re-upload it with the same name. You will find help in Graphics Lab if you're not sure how to do this.

Licensing

I, the copyright holder of this work, hereby publish it under the following license:
w:en:Creative Commons
attribution share alike
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

1 July 2013

285,376 byte

890 pixel

669 pixel

image/svg+xml

505af0d2b6dafe34d21b618807f13f1ca0005cdd

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current22:00, 19 January 2024Thumbnail for version as of 22:00, 19 January 2024669 × 890 (279 KB)ManlleusFile uploaded using svgtranslate tool (https://svgtranslate.toolforge.org/). Added translation for ca.
18:05, 1 July 2013Thumbnail for version as of 18:05, 1 July 2013669 × 890 (275 KB)SvjoUser created page with UploadWizard

The following 7 pages use this file:

Global file usage

The following other wikis use this file:

Metadata