Hartmann mask

Hartmann screen used for the 200-inch (5.1 m) Hale Telescope
Using a Hartmann mask to adjust focus

Hartmann mask is a tool to help focusing telescopes, mainly used by amateur astronomers. It is named after the German astronomer Johannes Franz Hartmann (1865–1936), who developed it around 1900.

History

[edit]

Hartmann mask was invented as a tool to check the quality of large optical mirrors. It was especially useful for large non-spherical mirrors for telescopes.[1] For example, the illustration on the right shows the Hartmann mask used to test the Hale Telescope five-meter primary mirror. In today's professional telescope making, it has been completely superseded by interferometric methods.

Theory and practice

[edit]

Every part of a mirror or lens produces the same image as the whole optical element. The light is focused in the focal point. The light rays, however, go through different points of a plane before or behind the focus.

This phenomenon can be used when focusing a telescope. The Hartmann mask is a simple opaque mask containing two or three holes. (This device is called a Hartmann mask if it has multiple holes, or a Scheiner disk if it has two holes.[2]) The mask covers the aperture of the telescope.

When the apparatus is out of focus, multiple images can be seen if the telescope is pointed towards a bright light source (Moon, bright star). Adjusting the focuser, the images can be made to overlap, forming a single bright, clear picture. The mask may also be used to check the figure of a mirror, as all the holes in the mask should each produce the same image.

See also

[edit]

Notes

[edit]
  1. ^ Micro, B. (2015, October 26). Hartmann test. Il Grattavettro. Retrieved September 14, 2023, from https://web.archive.org/web/20230724130837/https://www.grattavetro.it/hartmann-test/?lang=en
  2. ^ "Focusing Methods".

References

[edit]