Hotfoot 27

Hotfoot 27
Development
DesignerDoug Hemphill
LocationCanada
Year1981
Builder(s)Hotfoot Boats
NameHotfoot 27
Boat
Displacement3,600 lb (1,633 kg)
Draft5.50 ft (1.68 m)
Hull
TypeMonohull
ConstructionFibreglass
LOA27.00 ft (8.23 m)
LWL22.00 ft (6.71 m)
Beam9.33 ft (2.84 m)
Engine typeOutboard motor
Hull appendages
Keel/board typefin keel
Ballast1,500 lb (680 kg)
Rudder(s)transom-mounted rudder
Rig
Rig typeBermuda rig
I foretriangle height29.08 ft (8.86 m)
J foretriangle base9.75 ft (2.97 m)
P mainsail luff31.50 ft (9.60 m)
E mainsail foot13.00 ft (3.96 m)
Sails
SailplanFractional rigged sloop
Mainsail area204.75 sq ft (19.022 m2)
Jib/genoa area141.77 sq ft (13.171 m2)
Total sail area346.52 sq ft (32.193 m2)
Racing
PHRF147 (average)

The Hotfoot 27 is a Canadian sailboat that was designed by Doug Hemphill as racer-cruiser and first built in 1981.[1][2][3][4]

Production

[edit]

The design was built by Hotfoot Boats in Canada, but the company is no longer in business and the boat design is now out of production.[1][3][4][5]

Design

[edit]

The Hotfoot 27 is a recreational keelboat, built predominantly of fibreglass, with wood trim. It has a fractional sloop rig, a raked stem, a vertical transom, a transom-hung rudder controlled by a tiller and a fixed fin keel. It displaces 3,600 lb (1,633 kg) and carries 1,500 lb (680 kg) of ballast.[1][3][4]

The boat has a draft of 5.50 ft (1.68 m) with the standard keel fitted. The fresh water tank has a capacity of 12 U.S. gallons (45 L; 10.0 imp gal). The boat is normally fitted with a small outboard motor for docking and maneuvering. The motor is mounted in the starboard lazarette and can be swung up when not in use and the hull opening covered with a hatch.[1][4]

The boat's galley is located on the starboard side. It includes a sink and a single-burner alcohol stove, which both slide under the cockpit for stowage. The head is a chemical type and is located forward, just aft of the bow "V"-berth, forward of the bulkhead. Additional sleeping space is provided in the cabin, with two berths. A chart table is located on the port side and also stows under the cockpit when not in use.[3]

Standard equipment includes a spinnaker and associated gear, an outboard motor bracket, headfoil (a headsail airfoil-shaped reinforcement) and a compass. The boat's controls all can be actuated from the cockpit and include internally-mounted halyards. The cockpit has two genoa winches and two winches for the halyards. There is a 4:1 internal outhaul, an 8:1 boom vang and adjustable backstay and running backstays.[3]

The design has a PHRF racing average handicap of 147 with a high of 152 and low of 138. It has a hull speed of 6.29 kn (11.65 km/h).[4][6]

Operational history

[edit]

In a review Richard Sherwood wrote, "the Hotfoot is a new design that is selling well in Victoria, B.C., and starting to move south. Keel and rudder are both deep to assist to windward, often a problem with boats this light. The running backstays are unusual. The manufacturers feel that they are needed for shaping the sail, not for keeping the rig up."[3]

See also

[edit]

Similar sailboats

References

[edit]
  1. ^ a b c d Browning, Randy (2019). "Hotfoot 27 sailboat specifications and details". sailboatdata.com. Archived from the original on 9 April 2022. Retrieved 13 March 2019.
  2. ^ Browning, Randy (2019). "Doug Hemphill". sailboatdata.com. Archived from the original on 9 April 2022. Retrieved 13 March 2019.
  3. ^ a b c d e f Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 186-187. Houghton Mifflin Company, 1994. ISBN 0-395-65239-1
  4. ^ a b c d e Sea Time Tech, LLC (2022). "Hotfoot 27". sailboat.guide. Archived from the original on 9 April 2022. Retrieved 9 April 2022.
  5. ^ Browning, Randy (2019). "Hotfoot Boats (CAN)". sailboatdata.com. Archived from the original on 9 April 2022. Retrieved 13 March 2019.
  6. ^ InterVisionSoft LLC (2019). "Sailboat Specifications for Hotfoot 27". Sailing Joy. Retrieved 13 March 2019.[permanent dead link]