Tetragonal disphenoid honeycomb

Tetragonal disphenoid tetrahedral honeycomb
Type	convex uniform honeycomb dual
Coxeter-Dynkin diagram
Cell type	Tetragonal disphenoid
Face types	isosceles triangle {3}
Vertex figure	tetrakis hexahedron
Space group	Im3m (229)
Symmetry	[[4, 3, 4]]
Coxeter group	${\displaystyle {\tilde {C}}_{3}}$, [4, 3, 4]
Dual	Bitruncated cubic honeycomb
Properties	cell-transitive, face-transitive, vertex-transitive

The tetragonal disphenoid tetrahedral honeycomb is a space-filling tessellation (or honeycomb) in Euclidean 3-space made up of identical tetragonal disphenoidal cells. Cells are face-transitive with 4 identical isosceles triangle faces. John Horton Conway calls it an oblate tetrahedrille or shortened to obtetrahedrille.^[1]

A cell can be seen as 1/12 of a translational cube, with its vertices centered on two faces and two edges. Four of its edges belong to 6 cells, and two edges belong to 4 cells.

The tetrahedral disphenoid honeycomb is the dual of the uniform bitruncated cubic honeycomb.

Its vertices form the A^*
₃ / D^*
₃ lattice, which is also known as the body-centered cubic lattice.

This honeycomb's vertex figure is a tetrakis cube: 24 disphenoids meet at each vertex. The union of these 24 disphenoids forms a rhombic dodecahedron. Each edge of the tessellation is surrounded by either four or six disphenoids, according to whether it forms the base or one of the sides of its adjacent isosceles triangle faces respectively. When an edge forms the base of its adjacent isosceles triangles, and is surrounded by four disphenoids, they form an irregular octahedron. When an edge forms one of the two equal sides of its adjacent isosceles triangle faces, the six disphenoids surrounding the edge form a special type of parallelepiped called a trigonal trapezohedron.

An orientation of the tetragonal disphenoid honeycomb can be obtained by starting with a cubic honeycomb, subdividing it at the planes ${\displaystyle x=y}$, ${\displaystyle x=z}$, and ${\displaystyle y=z}$ (i.e. subdividing each cube into path-tetrahedra), then squashing it along the main diagonal until the distance between the points (0, 0, 0) and (1, 1, 1) becomes the same as the distance between the points (0, 0, 0) and (0, 0, 1).

Hexakis cubic honeycomb Pyramidille[2]
Type	Dual uniform honeycomb
Coxeter–Dynkin diagrams
Cell	Isosceles square pyramid
Faces	Triangle square
Space group Fibrifold notation	Pm3m (221) 4−:2
Coxeter group	${\displaystyle {\tilde {C}}_{3}}$, [4, 3, 4]
vertex figures	,
Dual	Truncated cubic honeycomb
Properties	Cell-transitive

The hexakis cubic honeycomb is a uniform space-filling tessellation (or honeycomb) in Euclidean 3-space. John Horton Conway calls it a pyramidille.^[2]

Cells can be seen in a translational cube, using 4 vertices on one face, and the cube center. Edges are colored by how many cells are around each of them.

It can be seen as a cubic honeycomb with each cube subdivided by a center point into 6 square pyramid cells.

There are two types of planes of faces: one as a square tiling, and flattened triangular tiling with half of the triangles removed as holes.

Tiling plane
Symmetry	p4m, [4,4] (*442)	pmm, [∞,2,∞] (*2222)

It is dual to the truncated cubic honeycomb with octahedral and truncated cubic cells:

If the square pyramids of the pyramidille are joined on their bases, another honeycomb is created with identical vertices and edges, called a square bipyramidal honeycomb, or the dual of the rectified cubic honeycomb.

It is analogous to the 2-dimensional tetrakis square tiling:

Square bipyramidal honeycomb Oblate octahedrille[2]
Type	Dual uniform honeycomb
Coxeter–Dynkin diagrams
Cell	Square bipyramid
Faces	Triangles
Space group Fibrifold notation	Pm3m (221) 4−:2
Coxeter group	${\displaystyle {\tilde {C}}_{3}}$, [4,3,4]
vertex figures	,
Dual	Rectified cubic honeycomb
Properties	Cell-transitive, Face-transitive

The square bipyramidal honeycomb is a uniform space-filling tessellation (or honeycomb) in Euclidean 3-space. John Horton Conway calls it an oblate octahedrille or shortened to oboctahedrille.^[1]

A cell can be seen positioned within a translational cube, with 4 vertices mid-edge and 2 vertices in opposite faces. Edges are colored and labeled by the number of cells around the edge.

It can be seen as a cubic honeycomb with each cube subdivided by a center point into 6 square pyramid cells. The original cubic honeycomb walls are removed, joining pairs of square pyramids into square bipyramids (octahedra). Its vertex and edge framework is identical to the hexakis cubic honeycomb.

There is one type of plane with faces: a flattened triangular tiling with half of the triangles as holes. These cut face-diagonally through the original cubes. There are also square tiling plane that exist as nonface holes passing through the centers of the octahedral cells.

Tiling plane	Square tiling "holes"	flattened triangular tiling
Symmetry	p4m, [4,4] (*442)	pmm, [∞,2,∞] (*2222)

It is dual to the rectified cubic honeycomb with octahedral and cuboctahedral cells:

Phyllic disphenoidal honeycomb Eighth pyramidille[3]
(No image)
Type	Dual uniform honeycomb
Coxeter-Dynkin diagrams
Cell	Phyllic disphenoid
Faces	Rhombus Triangle
Space group Fibrifold notation Coxeter notation	Im3m (229) 8o:2 [[4,3,4]]
Coxeter group	[4,3,4], ${\displaystyle {\tilde {C}}_{3}}$
vertex figures	,
Dual	Omnitruncated cubic honeycomb
Properties	Cell-transitive, face-transitive

The phyllic disphenoidal honeycomb is a uniform space-filling tessellation (or honeycomb) in Euclidean 3-space. John Horton Conway calls this an Eighth pyramidille.^[3]

A cell can be seen as 1/48 of a translational cube with vertices positioned: one corner, one edge center, one face center, and the cube center. The edge colors and labels specify how many cells exist around the edge. It is one 1/6 of a smaller cube, with 6 phyllic disphenoidal cells sharing a common diagonal axis.

It is dual to the omnitruncated cubic honeycomb:

• Architectonic and catoptric tessellation
• Cubic honeycomb
• Space frame
• Triakis truncated tetrahedral honeycomb

• Gibb, William (1990), "Paper patterns: solid shapes from metric paper", Mathematics in School, 19 (3): 2–4, reprinted in Pritchard, Chris, ed. (2003), The Changing Shape of Geometry: Celebrating a Century of Geometry and Geometry Teaching, Cambridge University Press, pp. 363–366, ISBN 0-521-53162-4.
• Senechal, Marjorie (1981), "Which tetrahedra fill space?", Mathematics Magazine, 54 (5), Mathematical Association of America: 227–243, doi:10.2307/2689983, JSTOR 2689983.
• Conway, John H.; Burgiel, Heidi; Goodman-Strauss, Chaim (2008). "21. Naming Archimedean and Catalan Polyhedra and Tilings". The Symmetries of Things. A K Peters, Ltd. pp. 292–298. ISBN 978-1-56881-220-5.