Van der Waals equation

The van der Waals equation, named for its originator, the Dutch physicist Johannes Diderik van der Waals, is an equation of state that extends the ideal gas law to include the non-zero size of gas molecules and the interactions between them (both of which depend on the specific substance). As a result the equation is able to model the liquidvapor phase change; it is the first equation that did this, and consequently it had a substantial impact on physics at that time. It also produces simple analytic expressions for the properties of real substances that shed light on their behavior. One way to write this equation is[1][2][3]

where is pressure, is temperature, and is molar volume, is the Avogadro constant, is the volume, and is the number of molecules (the ratio is called the amount of substance). In addition, is the universal gas constant, is the Boltzmann constant, and and are experimentally determinable, substance-specific constants.

The force exerted by a molecule on another at a distance is the negative of the slope of this curve at . The force is repulsive, and large, for , and attractive when .

The constant expresses the strength of the molecular interactions. It has dimension of pressure times molar volume squared [pv2], which is also molar energy times molar volume. The constant denotes an excluded molar volume; it is some multiple of the molecular volume, because the centers of two hard spheres can never be closer than their diameter. It has dimension molar volume [v].

A theoretical calculation of these constants at low density for spherical molecules with an interparticle potential characterized by a length and a minimum energy (with ), as shown in the accompanying plot produces . Multiplying this by the number of moles, , gives the excluded volume as 4 times the volume of all the molecules.[4] This theory also produces where is a number that depends on the shape of the potential function .[5]

In his book Boltzmann wrote equations using (specific volume) in place of (molar volume) used here;[6] Gibbs did as well, so do most engineers. Also the property the reciprocal of number density, is used by physicists, but there is no essential difference between equations written with any of these properties. Equations of state written using molar volume contain , while those using specific volume contain (where is the molar mass of a substance whose particle mass is ), and those written with number density contain .

Once and are experimentally determined for a given substance, the van der Waals equation can be used to predict the boiling point at any given pressure, the critical point (defined by pressure and temperature values, , such that the substance cannot be liquefied either when no matter how low the temperature is, or when no matter how high the pressure is), and other attributes. These predictions are accurate for only a few substances. For most simple fluids they are only a valuable approximation. The equation also explains why superheated liquids can exist above their boiling point and subcooled vapors can exist below their condensation point.

Eaxmples of isobars (constant-pressure curves)

The graph on the right is a plot of vs calculated from the equation at four constant pressure values. On the red isobar, , the slope is positive over the entire range, (although the plot only shows a finite quadrant). This describes a fluid as a gas for all , and is characteristic of all isobars The green isobar, , has a physically unreal negative slope, hence shown dotted gray, between its local minimum, , and local maximum, . This describes the fluid as two disconnected branches; a gas for , and a denser liquid for .[7]

The thermodynamic requirements of mechanical, thermal, and material equilibrium together with the equation specify two points on the curve, , and , shown as green circles that designate the coexisting boiling liquid and condensing gas respectively. Heating the fluid in this state increases the fraction of gas in the mixture; its , an average of and weighted by this fraction, increases while remains the same. This is shown as the dotted gray line, because it does not represent a solution of the equation; however, it does describe the observed behavior. The points above , superheated liquid, and those below it, subcooled vapor, are metastable; a sufficiently strong disturbance causes them to transform to the stable alternative (like a ball trapped in a local minimum of a sloping curve that has a lower minimum; the ball has a higher energy than the minimum possible, but can only get there by a push that gets it over the local hill). Consequently they are shown dashed. Finally the points in the region of negative slope are unstable. All this describes a fluid as a stable gas for , a stable liquid for , and a mixture of liquid and gas at , that also supports metastable states of subcooled gas and superheated liquid. It is characteristic of all isobars , where is a function of .[8] The orange isobar is the critical one on which the minimum and maximum are equal. The black isobar is the limit of positive pressures, although drawn solid none of its points represent stable solutions, they are either metastable (positive or zero slope) or unstable (negative slope. All this is a good explanation of the observed behavior of fluids.

Relationship to the ideal gas law

[edit]

The ideal gas law follows from the van der Waals equation whenever is sufficiently large (or correspondingly whenever the molar density, , is sufficiently small), Specifically[9]

  • when , then is numerically indistinguishable from ,
  • and when , then is numerically indistinguishable from .

Putting these two approximations into the van der Waals equation when is large enough that both inequalities are satisfied reduces it to

which is the ideal gas law.[9] This is not surprising since the van der Waals equation was constructed from the ideal gas equation in order to obtain an equation valid beyond the limit of ideal gas behavior.

What is truly remarkable is the extent to which van der Waals succeeded. Indeed, Epstein in his classic thermodynamics textbook began his discussion of the van der Waals equation by writing, "In spite of its simplicity, it comprehends both the gaseous and the liquid state and brings out, in a most remarkable way, all the phenomena pertaining to the continuity of these two states".[9] Also in Volume 5 of his Lectures on Theoretical Physics Sommerfeld, in addition to noting that "Boltzmann[10] described van der Waals as the Newton of real gases",[11] also wrote "It is very remarkable that the theory due to van der Waals is in a position to predict, at least qualitatively, the unstable [referring to superheated liquid, and subcooled vapor now called metastable] states" that are associated with the phase change process.[12]

Utility of the equation

[edit]

The equation has been, and remains very useful because:[13]

  • its specific heat at constant volume, , can be shown to be a function of only, and its thermodynamic properties, internal energy , entropy , as well as the specific heat at constant pressure have simple analytic expressions [this is also true of enthalpy , Helmholtz free energy , and Gibbs free energy ]
  • Its coefficient of thermal expansion, has a simple analytic expression [this is also true of its isothermal compressibility, ]
  • it explains the existence of the critical point and the liquid–vapor phase transition including the observed metastable states
  • it establishes the law of corresponding states
  • its Joule–Thomson coefficient and associated inversion curve, which were instrumental in the development of the commercial liquefaction of gases, have simple analytic expressions.

In addition its vapor presure curve (also called the coexistence, or saturation, curve) has a simple analytic solution. It depicts the liquid metals, Mercury and Cesium, quantitatively, and describes most real fluids qualitatively.[14] Consequently it can be regarded as one member of a family of equations of state,[15] that depend on a molecular parameter such as the critical compressibility factor, , or the Pitzer (acentric) factor, , where is a dimensionless saturation pressure, and log is the logarithm base 10.[16] Consequently, the equation plays an important role in the modern theory of phase transitions.[17]

All this makes it a worthwhile pedagogical tool for physics, chemistry, and engineering lecturers, in addition to being a useful mathematical model which can aid student understanding.

History

[edit]

In 1857 Rudolf Clausius published The Nature of the Motion which We Call Heat. In it he derived the relation for the pressure, , in a gas, composed of particles in motion, with number density , mass , and mean square speed . He then noted that using the classical laws of Boyle and Charles one could write with a constant of proportionality. Hence temperature was proportional to the average kinetic energy of the particles.[18] This article inspired further work based on the twin ideas that substances are composed of indivisible particles, and that heat is a consequence of the particle motion; movement that evolves in accordance with Newton's laws. The work, known as the kinetic theory of gases, was done principally by Clausius, James Clerk Maxwell, and Ludwig Boltzmann. At about the same time J. Willard Gibbs also contributed, and advanced it by converting it into statistical mechanics.[19]

Van der Waals equation on a wall in Leiden

This environment influenced Johannes Diderik van der Waals. After initially pursuing a teaching credential, he was accepted for doctoral studies at the University of Leiden under Pieter Rijke. This led, in 1873, to a dissertation that provided a simple, particle based, equation that described the gas–liquid change of state, the origin of a critical temperature, and the concept of corresponding states.[20][21] The equation is based on two premises, first that fluids are composed of particles with non-zero volumes, and second that at a large enough distance each particle exerts an attractive force on all other particles in its vicinity. These forces were called by Boltzmann van der Waals cohesive forces.[22]

In 1869 Irish professor of chemistry Thomas Andrews at Queen's University Belfast in a paper entitled On the Continuity of the Gaseous and Liquid States of Matter,[23] displayed an experimentally obtained set of isotherms of carbonic acid, HCO, that showed at low temperatures a jump in density at a certain pressure, while at higher temperatures there was no abrupt change; the figure can be seen here. Andrews called the isotherm at which the jump just disappeared the critical point. Given the similarity of the titles of this paper and van der Waals subsequent thesis one might think that van der Waals set out to develop a theoretical explanation of Andrews' experiments; however, this is not what happened. Van der Waals began work by trying to determine a mollecular attraction that appeared in Laplace's theory of capillarity, and only after establishing his equation he tested it using Andrews results.[24][25]

By 1877 sprays of both liquid oxygen and liquid nitrogen had been produced, and a new field of research, low temperature physics, had been opened. The van der Waals equation played a part in all this especially with respect to the liquefaction of hydrogen and helium which was finally achieved in 1908.[26] From measurements of and in two states with the same density, the van der Waals equation produces the values,[27]

Thus from two such measurements of pressure and temperature one could determine and , and from these values calculate the expected critical pressure, temperature, and molar volume. Goodstein summarized this contribution of the van der Waals equation as follows:[28]

All this labor required considerable faith in the belief that gas–liquid systems were all basically the same, even if no one had ever seen the liquid phase. This faith arose out of the repeated success of the van der Waals theory, which is essentially a universal equation of state, independent of the details of any particular substance once it has been properly scaled. ... As a result, not only was it possible to believe that hydrogen could be liquefied. but it was even possible to predict the necessary temperature and pressure.

Van der Waals was awarded the Nobel Prize in 1910, in recognition of the contribution of his formulation of this "equation of state for gases and liquids".

As noted previously, modern day studies of first order phase changes make use of the van der Waals equation together with the Gibbs criterion, equal chemical potential of each phase, as a model of the phenomenon. This model has an analytic coexistence (saturation) curve expressed parametrically, (the parameter is related to the entropy difference between the two phases), that was first obtained by Plank,[29] was known to Gibbs and others, and was later derived in a beautifully simple and elegant manner by Lekner.[30] A summary of Lekner's solution is presented in a subsequent section, and a more complete discussion in the Maxwell construction.

Critical point and corresponding states

[edit]

Figure 1 shows four isotherms of the van der Waals equation (abbreviated as vdW) on a pressure, molar volume plane. The essential character of these curves is that:

Figure 1: Four isotherms of the van der Waals equation along with the black dash dot spinodal curve and the red dash dot coexistence (saturation) curve plotted using reduced (dimensionless) variables.
  1. at some critical temperature, the slope is negative, , everywhere except at a single point, the critical point, , where both the slope and curvature are zero,
  2. at higher temperatures the slope of the isotherms is everywhere negative (values of for which the equation has 1 real root for );
  3. at lower temperatures there are two points on each isotherm where the slope is zero (values of , for which the equation has 3 real roots for )

Evaluating the two partial derivatives in 1) using the vdW equation and equating them to zero produces, , and using these in the equation gives .[31]

This calculation can also be done algebraically by noting that the vdW equation can be written as a cubic in , which at the critical point is,

Moreover, at the critical point all three roots coalesce so it can also be written as

Then dividing the first by , and noting that these two cubic equations are the same when all their coefficients are equal gives three equations, , whose solution produces the previous results for .[32][33]

Using these critical values to define reduced properties renders the equation in the dimensionless form used to construct Fig. 1

This dimensionless form is a similarity relation; it indicates that all vdW fluids at the same will plot on the same curve. It expresses the law of corresponding states which Boltzmann described as follows:[34]

All the constants characterizing the gas have dropped out of this equation. If one bases measurements on the van der Waals units [Boltzmann's name for the reduced quantities here], then he obtains the same equation of state for all gases. ... Only the values of the critical volume, pressure, and temperature depend on the nature of the particular substance; the numbers that express the actual volume, pressure, and temperature as multiples of the critical values satisfy the same equation for all substances. In other words, the same equation relates the reduced volume, reduced pressure, and reduced temperature for all substances.

Obviously such a broad general relation is unlikely to be correct; nevertheless, the fact that one can obtain from it an essentially correct description of actual phenomena is very remarkable.

This "law" is just a special case of dimensional analysis in which an equation containing 6 dimensional quantities, , and 3 independent dimensions, [p], [v], [T] (independent means that "none of the dimensions of these quantities can be represented as a product of powers of the dimensions of the remaining quantities",[35] and [R]=[pv/T]), must be expressible in terms of 6 − 3 = 3 dimensionless groups.[36] Here is a characteristic molar volume, a characteristic pressure, and a characteristic temperature, and the 3 dimensionless groups are . According to dimensional analysis the equation must then have the form , a general similarity relation. In his discussion of the vdW equation Sommerfeld also mentioned this point.[37] The reduced properties defined previously are , , and . Recent research has suggested that there is a family of equations of state that depend on an additional dimensionless group, and this provides a more exact correlation of properties. Nevertheless, as Boltzmann observed, the van der Waals equation provides an essentially correct description.

The vdW equation produces , while for most real fluids .[38] Thus most real fluids do not satisfy this condition, and consequently their behavior is only described qualitatively by the vdW equation. However, the vdW equation of state is a member of a family of state equations based on the Pitzer (acentric) factor, , and the liquid metals, Mercury and Cesium, are well approximated by it.[14][39]

Thermodynamic properties

[edit]

The properties molar internal energy, , and entropy, , defined by the first and second laws of thermodynamics, hence all thermodynamic properties of a simple compressible substance, can be specified, up to a constant of integration, by two measurable functions, a mechanical equation of state, , and a constant volume specific heat, .

Internal energy and specific heat at constant volume

[edit]

The internal energy is given by the energetic equation of state,[40][41]

where is an arbitrary constant of integration.

Now in order for to be an exact differential, namely that be continuous with continuous partial derivatives, its second mixed partial derivatives must also be equal, . Then with this condition can be written simply as . Differentiating for the vdW equation gives , so . Consequently for a vdW fluid exactly as it is for an ideal gas. To keep things simple it is regarded as a constant here, with a number. Then both integrals can be easily evaluated and the result is

This is the energetic equation of state for a perfect vdW fluid. By making a dimensional analysis (what might be called extending the principle of corresponding states to other thermodynamic properties) it can be written simply in reduced form as, [42]

where and is a dimensionless constant.

Enthalpy

[edit]

The enthalpy is , and the product is just . Then

is simply

This is the enthalpic equation of state for a perfect vdW fluid, or in reduced form,[43]

Entropy

[edit]

The entropy is given by the entropic equation of state:[44][41]

Using as before, and integrating the second term using we obtain simply

This is the entropic equation of state for a perfect vdW fluid, or in reduced form,[43]

Helmholtz free energy

[edit]

The Helmholtz free energy is so combining the previous results

This is the Helmholtz free energy for a perfect vdw fluid, or in reduced form

Gibbs free energy

[edit]

The Gibbs free energy is so combining the previous results gives

This is the Gibbs free energy for a perfect vdW fluid, or in reduced form

Thermodynamic derivatives: α, κT and cp

[edit]

The two first partial derivatives of the vdW equation are

Here , the isothermal compressibility, is a measure of the relative increase of volume from an increase of pressure, at constant temperature, while , the coefficient of thermal expansion, is a measure of the relative increase of volume from an increase of temperature, at constant pressure. Therefore,[45][43]

In the limit while . Since the vdW equation in this limit becomes , finally . Both of these are the ideal gas values, which is consistent because, as noted earlier, the vdW fluid behaves like an ideal gas in this limit.

The specific heat at constant pressure, is defined as the partial derivative . However, it is not independent of , they are related by the Mayer equation, .[46][47][48] Then the two partials of the vdW equation can be used to express as,[49]

Here in the limit , , which is also the ideal gas result as expected;[49] however the limit gives the same result, which does not agree with experiments on liquids.

In this liquid limit we also find , namely that the vdW liquid is incompressible. Moreover, since , it is also mechanically incompressible, that is faster than .

Finally , and are all infinite on the curve .[49] This curve, called the spinodal curve, is defined by , and is discussed at length in the next section.

Stability

[edit]

According to the extremum principle of thermodynamics and , namely that at equilibrium the entropy is a maximum. This leads to a requirement that .[50] This mathematical criterion expresses a physical condition which Epstein described as follows:[9]

Figure 1 repeated

"It is obvious that this middle part, dotted in our curves [the place where the requirement is violated, dashed gray in Fig. 1 and repeated here], can have no physical reality. In fact, let us imagine the fluid in a state corresponding to this part of the curve contained in a heat conducting vertical cylinder whose top is formed by a piston. The piston can slide up and down in the cylinder, and we put on it a load exactly balancing the pressure of the gas. If we take a little weight off the piston, there will no longer be equilibrium and it will begin to move upward. However, as it moves the volume of the gas increases and with it its pressure. The resultant force on the piston gets larger, retaining its upward direction. The piston will, therefore, continue to move and the gas to expand until it reaches the state represented by the maximum of the isotherm. Vice versa, if we add ever so little to the load of the balanced piston, the gas will collapse to the state corresponding to the minimum of the isotherm"

While on an isotherm this requirement is satisfied everywhere so all states are gas, those states on an isotherm, which lie between the local minimum, , and local maximum, , for which (shown dashed gray in Fig. 1), are unstable and thus not observed. This is the genesis of the phase change; there is a range , for which no observable states exist. The states for are liquid, and for are vapor; the denser liquid lies below the vapor due to gravity. The transition points, states with zero slope, are called spinodal points.[51] Their locus is the spinodal curve that separates the regions of the plane for which liquid, vapor, and gas exist from a region where no observable homogeneous states exist. This spinodal curve is obtained here from the vdW equation by differentiation (or equivalently from ) as

A projection of this space curve is plotted in Fig. 1 as the black dash dot curve. It passes through the critical point which is also a spinodal point.

Saturation

[edit]

Although the gap in delimited by the two spinodal points on an isotherm (e.g. shown in Fig. 1) is the origin of the phase change, the spinodal points do not represent its full extent, because both states, saturated liquid and saturated vapor coexist in equlilbrium; they both must have the same pressure as well as the same temperature.[52] Thus the phase change is characterized, at temperature , by a pressure that lies between that of the minimum and maximum spinodal points, and with molar volumes of liquid, and vapor . Then from the vdW equation applied to these saturated liquid and vapor states

These two vdW equations contain 4 variables, , so another equation is required in order to specify the values of 3 of these variables uniquely in terms of a fourth. Such an equation is provided here by the equality of the Gibbs free energy in the saturated liquid and vapor states, .[53] This condition of material equilibrium can be obtained from a simple physical argument as follows: the energy required to vaporize a mole is from the second law at constant temperature , and from the first law at constant pressure . Equating these two, rearranging, and recalling that produces the result.

The Gibbs free energy is one of the 4 thermodynamic potentials whose partial derivatives produce all other thermodynamics state properties;[54] its differential is . Integrating this over an isotherm from to , noting that the pressure is the same at each endpoint, and setting the result to zero yields

Here because is a multivalued function, the integral must be divided into 3 parts corresponding to the 3 real roots of the vdW equation in the form, (this can be visualized most easily by imagining Fig. 1 rotated ); the result is a special case of material equilibrium.[55] The last equality, which follows from integrating , is the Maxwell equal area rule which requires that the upper area between the vdW curve and the horizontal through be equal to the lower one.[56] This form means that the thermodynamic restriction that fixes is specified by the equation of state itself, . Using the equation for the Gibbs free energy obtained previously for the vdW equation applied to the saturated vapor state and subtracting the result applied to the saturated liquid state produces,

This is a third equation that along with the two vdW equations above can be solved numerically. This has been done given a value for either or , and tabular results presented;[57][58] however, the equations also admit an analytic parametric solution obtained most simply and elegantly, by Lekner.[30] Details of this solution may be found in the Maxwell Construction; the results are

where

Figure 2: The dashed dot black curve is the stability limit (spinodal curve) and the dashed dot blue curve is the coexistence, or saturation curve, plotted in the plane. At every point in the region between the two curves there are two states, one stable and another metastable. The metastable states, superheated liquid, and subcooled vapor, are shown dotted in Fig. 1.

and the parameter is given physically by . The values of all other property discontinuities across the saturation curve also follow from this solution.[59] These functions define the coexistence curve which is the locus of the saturated liquid and saturated vapor states of the vdW fluid. The curve is plotted in Fig. 1 and Fig. 2, two projections of the state surface. These curves and the numerical results referenced earlier agree exactly, as they must.

Referring back to Fig. 1 the isotherms for are discontinuous. Considering as an example, it consists of the two separate green segments. The solid segment above the green circle on the left, and below the one on the right correspond to stable states, the dots represent the saturated liquid and vapor states that comprise the phase change, and the two green dotted segments below and above the dots are metastable states, superheated liquid and subcooled vapor, that are created in the process of phase transition, have a short lifetime, then devolve into their lower energy stable alternative.

In his treatise of 1898 in which he described the van der Waals equation in great detail Boltzmann discussed these states in a section titled "Undercooling, Delayed evaporation";[60] they are now denoted subcooled vapor, and superheated liquid. Moreover, it has now become clear that these metastable states occur regularly in the phase transition process. In particular processes that involve very high heat fluxes create large numbers of these states, and transition to their stable alternative with a corresponding release of energy can be dangerous. Consequently there is a pressing need to study their thermal properties.[61]

In the same section Boltzmann also addressed and explained the negative pressures which some liquid metastable states exhibit (for example of Fig. 1). He concluded that such liquid states of tensile stresses were real, as did Tien and Lienhard many years later who wrote "The van der Waals equation predicts that at low temperatures liquids sustain enormous tension...In recent years measurements have been made that reveal this to be entirely correct."[62]

Even though the phase change produces a mathematical discontinuity in the homogeneous fluid properties, for example , there is no physical discontinuity.[55] As the liquid begins to vaporize the fluid becomes a heterogeneous mixture of liquid and vapor whose molar volume varies continuously from to according to the equation of state

Figure 3: The family of saturation curves showing the vdw curve as a member. The blue dots are calculated from Lekner's solution. The orange dots are calculated from data in the ASME Steam Tables Compact Edition, 2006.

where is the mole fraction of the vapor. This equation is called the lever rule and applies to other properties as well.[12][55] The states it represents form a horizontal line connecting the same colored dots on an isotherm, but not shown in Fig. 1 as noted already since it is a distinct equation of state for the heterogeneous combination of liquid and vapor components.

Extended corresponding states

[edit]

The idea of corresponding states originated when van der Waals cast his equation in the dimensionless form, . However, as Boltzmann noted, such a simple representation could not correctly describe all substances. Indeed, the saturation analysis of this form produces , namely all substances have the same dimensionless coexistence curve.[63] In order to avoid this paradox an extended principle of corresponding states has been suggested in which where is a substance dependent dimensionless parameter related to the only physical feature associated with an individual substance, its critical point.

Figure 4: A plot of the correlation including data from various substances.

The most obvious candidate for is the critical compressibility factor , but because is difficult to measure accurately, the acentric factor developed by Kenneth Pitzer,[16] , is more useful. The saturation pressure in this situation is represented by a one parameter family of curves, . Several investigators have produced correlations of saturation data for a number of substances, the best is that of Dong and Lienhard,[39]

which has an rms error of over the range


Figure 3 is a plot of vs . for various values of as given by this equation. The ordinate is logarithmic in order to show the behavior at pressures far below the critical where differences among the various substances (indicated by varying values of ) are more pronounced.

Figure 4 is another plot of the same equation showing as a function of for various values of . It includes data from 51 substances, including the vdW fluid, over the range . This plot shows clearly that the vdW fluid () is a member of the class of real fluids; indeed it quantitatively describes the behavior of the liquid metals cesium () and mercury () whose values of are close to the vdW value. However, it describes the behavior of other fluids only qualitatively, because specific numerical values are modified by differing values of their Pitzer factor, .

Joule–Thomson coefficient

[edit]

The Joule–Thomson coefficient, , is of practical importance because the two end states of a throttling process () lie on a constant enthalpy curve. Although ideal gases, for which , do not change temperature in such a process, real gases do, and it is important in applications to know whether they heat up or cool down.[64]

This coefficient can be found in terms of the previously described derivatives as,[65]

so when is positive the gas temperature decreases when it passes through a throttle, and if it is negative the temperature increases. Therefore the condition defines a curve that separates the region of the plane where from the region where it is less than zero. This curve is called the inversion curve, and its equation is . Using the expression for derived previously for the van der Waals equation this is

Note that for there will be cooling for or in terms of the critical temperature . As Sommerfeld noted, "This is the case with air and with most other gases. Air can be cooled at will by repeated expansion and can finally be liquified."[66]

Figure 5: Curves of constant enthalpy in this plane have negative slope above this (green) inversion curve, positive slope below it and zero slope on it; they are S-shaped. A gas entering a throttle at a state corresponding to a point on this curve to the right of its maximum will cool if the final state is below the curve. The other (dashed purple) curve in the graph is the saturation curve. The graph on the right is the square (0,0),(1.1,1.1) of the left graph expanded to display the overlap between the inversion and saturation curves.

In terms of the equation has a simple positive solution which, for produces, . Using this to eliminate from the vdW equation then gives the inversion curve as

where, for simplicity, have been replaced by .

The maximum of this, quadratic, curve occurs, with , for

which gives , or , and the corresponding . The zeros of the curve , are, making use of the quadratic formula, , or and ( and ). In terms of the dimensionless variables, the zeros are at and , while the maximum is , and occurs at . A plot of the curve is shown in green in Fig. 5. Sommerfeld also displays this plot,[67] together with a curve drawn using experimental data from H2. The two curves agree qualitatively, but not quantitatively. For example the maximum on these two curves differ by about 40% in both magnitude and location.

Figure 5 shows an overlap between the saturation curve and the inversion curve plotted there. This region is shown enlarged in the right hand graph of the figure. Thus a van der Waals gas can be liquified by passing it through a throttle under the proper conditions; real gases are liquified in this way.

Compressibility factor

[edit]
Figure 6: The isotherms, spinodal and coexistence curves here are the same as in Fig. 1. In addition the isotherm , which has zero slope at the origin is plotted and the isotherm . The abscissa here is which varies from 0 to 1.
Figure 7: Generalized compressibility chart for a van der Waals gas.

Real gases are characterized by their difference from ideal by writing . Here , called the compressibility factor, is expressed either as or . In either case

takes the ideal gas value. In the second case ,[68] so for a van der Waals fluid the compressibility factor is simply , or in terms of reduced variables

where . At the critical point, , .

In the limit , ; the fluid behaves like an ideal gas, a point noted several times earlier. The derivative is never negative when , namely when (). Alternatively when the initial slope is negative, it becomes zero at , and is positive for larger (see Fig. 6). In this case the value of passes through when . Here is called the Boyle temperature. It varies between , and denotes a point in space where the equation of state reduces to the ideal gas law. However the fluid does not behave like an ideal gas there, because neither its derivatives reduce to their ideal gas values, other than where the actual ideal gas region.[69]

Figure 6 shows a plot of various isotherms of vs . Also shown are the spinodal and coexistence curves described previously. The subcritical isotherm consists of stable, metastable, and unstable segments, and are identified the same as they were in Fig. 1. Also included are the zero initial slope isotherm and the one corresponding to infinite temperature.

By plotting vs using as a parameter, one obtains the generalized compressibility chart for a vdW gas, which is shown in Fig. 7. Like all other vdW properties, this is not quantitatively correct for most gases but it has the correct qualitative features as can be seen by comparison with this figure which was produced from data using real gases.[70][71] The two graphs are similar, including the caustic generated by the crossing isotherms; they are qualitatively very much alike.

Virial expansion

[edit]

Statistical mechanics suggests that can be expressed by a power series called a virial expansion,[72]

The functions are the virial coefficients; the th term represents a particle interaction.

Expanding the term in the compressibility factor of the vdW equation in its infinite series, convergent for , produces

The corresponding expression for when is

These are the virial expansions, one dimensional and one dimensionless, for the van der Waals fluid. The second virial coefficient is the slope of at . Notice that it can be positive or negative depending on whether or not , which agrees with the result found previously by differentiation.

For molecules that are non attracting hard spheres, , the vdW virial expansion becomes simply

which illustrates the effect of the excluded volume alone. It was recognized early on that this was in error beginning with the term . Boltzmann calculated its correct value as , and used the result to propose an enhanced version of the vdW equation

On expanding , this produced the correct coefficients thru and also gave infinite pressure at , which is approximately the close packing distance for hard spheres.[73] This was one of the first of many equations of state proposed over the years that attempted to make quantitative improvements to the remarkably accurate explanations of real gas behavior produced by the vdW equation.[74]

Mixtures

[edit]

In 1890 van der Waals published an article that initiated the study of fluid mixtures. It was subsequently included as Part III of a later published version of his thesis.[75] His essential idea was that in a binary mixture of vdw fluids described by the equations

the mixture is also a vdW fluid given by

where