Sodium permanganate

Sodium permanganate
Names
IUPAC name
Sodium manganate(VII)
Other names
Sodium permanganate, permanganate of sodium
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.030.215 Edit this at Wikidata
RTECS number
  • SD6650000
UNII
  • InChI=1S/Mn.Na.4O/q;+1;;;;-1 checkY
    Key: WPWYHBSOACXYBB-UHFFFAOYSA-N checkY
  • InChI=1/Mn.Na.4O/q;+1;;;;-1/rMnO4.Na/c2-1(3,4)5;/q-1;+1
    Key: WPWYHBSOACXYBB-NJUWVQTAAZ
  • [Na+].[O-][Mn](=O)(=O)=O
Properties
NaMnO4
Molar mass 141.9254 g/mol
159.94 g/mol (monohydrate)
Appearance Red solid
Density 1.972 g/cm3 (monohydrate)
Melting point 36 °C (97 °F; 309 K) (170 °C for trihydrate)
90 g/100 mL
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Oxidizer
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Sodium permanganate is the inorganic compound with the formula NaMnO4. It is closely related to the more commonly encountered potassium permanganate, but it is generally less desirable, because it is more expensive to produce. It is mainly available as the monohydrate. This salt absorbs water from the atmosphere and has a low melting point. Being about 15 times more soluble than KMnO4, sodium permanganate finds some applications where very high concentrations of MnO4 are sought.

Preparation and properties

[edit]

Sodium permanganate cannot be prepared analogously to the route to KMnO4 because the required intermediate manganate salt, Na2MnO4, does not form. Thus less direct routes are used including conversion from KMnO4.[1]

Sodium permanganate behaves similarly to potassium permanganate. It dissolves readily in water to give deep purple solutions, evaporation of which gives prismatic purple-black glistening crystals of the monohydrate NaMnO4·H2O. The potassium salt does not form a hydrate. Because of its hygroscopic nature, it is less useful in analytical chemistry than its potassium counterpart.

It can be prepared by the reaction of manganese dioxide with sodium hypochlorite:

2 MnO2 + 3 NaClO + 2 NaOH → 2 NaMnO4 + 3 NaCl + H2O

Applications

[edit]

Because of its high solubility, its aqueous solutions are used as a drilled hole debris remover and etchant in printed circuitry, with a limited utility though.[1] It is gaining popularity in water treatment for taste, odor, and zebra mussel control.[2] The V-2 rocket used it in combination with hydrogen peroxide to drive a steam turbopump.[3]

As an oxidizer, sodium permanganate is used in environmental remediation of soil and groundwater contaminated with chlorinated solvents using the remediation technology in situ chemical oxidation, also referred to as ISCO. [4]

References

[edit]
  1. ^ a b Arno H. Reidies "Manganese Compounds" in Ullmann's Encyclopedia of Industrial Chemistry, 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a16_123
  2. ^ "Water Treatability Database". iaspub.epa.gov. Retrieved 2019-06-08.
  3. ^ Kennedy, Gregory P. (1983). Vengeance Weapon 2: The V-2 Guided Missile. Washington, DC: Smithsonian Institution Press. pp. 27, 74.
  4. ^ "In Situ Oxidation". clu-in.org. Retrieved 2023-06-12.