St. Louis–San Francisco 1522

St. Louis–San Francisco Railway 1522
Frisco No. 1522 on static display at the National Museum of Transportation in St. Louis, MO
Type and origin
Power typeSteam
BuilderBaldwin Locomotive Works
Serial number59134
Build dateMay 1926
Specifications
Configuration:
 • Whyte4-8-2 "Mountain"
Gauge4 ft 8+12 in (1,435 mm)
Driver dia.69 in (1.75 m)
Adhesive weight250,500 pounds (113.6 t)
Loco weight355,000 pounds (161.0 t)
Tender weight233,120 pounds (105.7 t)
Fuel typeOil
Boiler pressure200 psi (1.38 MPa)
CylindersTwo, outside
Cylinder size28×28 in (711×711 mm)
Performance figures
Power output3,600 hp (2,700 kW)
Tractive effort54,085 lbf (240.58 kN)
62,835 lbf (279.50 kN) with booster
Factor of adh.4.44
Career
OperatorsSt. Louis-San Francisco Railway "Frisco"
St. Louis Steam Train Association (September 1985 – September 2002)
ClassT-54
Number in class30
Numbers
  • SLSF 1522
Retired1951 (revenue service)
September 29, 2002 (excursion service)
PreservedMay 1959
RestoredApril 1988
Current ownerNational Museum of Transportation (St. Louis, Missouri)
DispositionOn static display

St. Louis–San Francisco Railway 1522 is a two-cylinder, simple class T-54 4-8-2 "Mountain" type steam locomotive built in 1926 by the Baldwin Locomotive Works for the St. Louis–San Francisco Railway (SLSF), also known as the "Frisco". It was retired by the Frisco in 1951 and in May 1959 donated to the National Museum of Transportation in St. Louis, Missouri, where it is currently on display. It was restored to operating condition in the spring of 1988 and operated in excursion service until the fall of 2002 when it was placed back into retirement at the museum.

The No. 1522 was built to handle Frisco's heavier passenger trains through the hilly Ozark regions. Five other examples of Frisco Mountain-type locomotives are preserved today throughout the United States.[1]

History

[edit]

Revenue service

[edit]

St. Louis–San Francisco 1522 was built in 1926 as part of the third order of 1500-class (aka T-54) "Mountain" type locomotives for the St. Louis-San Francisco Railway. Purchased for $70,000, the locomotive was built to handle heavy passenger and freight services along the Frisco Railway's Eastern and Western divisions, and had a 200 PSI boiler pressure, 69-inch drivers, 54,085 lbs. of tractive effort, and a top speed of 70 mph. Throughout its career, No. 1522, along with the other T-54s, was found to be well liked by engine crews, dispatchers, and the motive power department.[2] As they were true general-purpose locomotives, they were well suited for use in hotshot freight service, fast passenger service, or even local runs.[2]

In the decade following the start of World War II No. 1522 and 15 other T-54s were upgraded with booster engines, boiler pressure increased to 210 psi, and 6912-inch drivers, increasing their tractive force to 56,380 lbs (65,550 lbs. with the booster) and their top speed to 90 mph. At the same time the Frisco Railway was experimenting with diesel locomotives and began rapid conversion to diesel during the late 1940s and early 1950s. All scheduled steam operations ended on the Frisco in February 1952, and reserve steam operations ended in 1956.

First retirement

[edit]

The 1522 was originally retired about 1951.[3] In May 1959, The locomotive was selected for preservation and donated to the Museum of Transportation of St. Louis, Missouri.

First restoration and excursion career

[edit]

The No. 1522 sat on display until September 1985 when the newly formed non-profit organization, The St. Louis Steam Train Association, selected the locomotive for restoration to operational condition. Work was completed and by April, 1988, and the No. 1522 began a second career in excursion service which lasted until retirement again in late 2002. This locomotive did a variety of excursions and went through an additional overhaul.[3]

In October 1988, No. 1522 made its inaugural run to Decatur, Illinois.,[3] and in May 1989, the locomotive made a run to Moberly, Missouri.

During the NRHS annual convention in June 1990, No. 1522 pulled a 22-car excursion over Rolla Hill alongside St. Louis Southwestern 819, Norfolk and Western 1218, and Union Pacific 844. It ran a double-header excursion with Union Pacific 844 after the convention was completed.

In June 1994, No. 1522 was one of the locomotives to participate in the 1994 NRHS annual convention in Atlanta, Georgia, and did a double-header with Norfolk and Western 611 from Birmingham, Alabama to Atlanta on its way to the convention. In June of the following year, the locomotive was the special guest of the annual haymarket heyday and did several excursions between Omaha and Lincoln, Nebraska.

No. 1522 derailed on a wye in North St. Louis, Missouri on May 17, 1999, while on a test run following an 18-month overhaul. A rail overturned under the fireman's side as the locomotive was moving onto the wye, causing extensive damage to the running gear. The damage was repaired and the locomotive returned to service a few months later with help from the Tennessee Valley Railroad Museum.[4]

In June 2001, No. 1522 was invited to pull the Burlington Northern Santa Fe annual employee appreciation special which included a historic tour through the state of Texas. The 1522 was also invited to pull several excursions for the 2001 NRHS annual convention held that year in St. Louis.

Second retirement

[edit]

In 2002, it was announced that the No. 1522 was to be put back into retirement as a result of increased insurance rates and flue failures. New FRA regulations required that an active steam locomotive must be inspected and re-tubed every 15 years. (old boiler flues must be replaced with new ones), which proved to be too expensive for the SLSTA. Between September 28 and 29 of that year, No. 1522 ran farewell excursions, and right afterwards it was put back into retirement.[5][6] As of 2024, Frisco 1522 is still a major exhibit at the National Museum of Transportation, and it remains the only 4-8-2 type locomotive in the United States to have an excursion career. Due to it being in poor mechanical condition, it will likely never run under its own power again. Some people have stated that while the locomotive could technically be restored, it is not financially feasible, as her original flue sheet is badly cracked, which would mean fabricating a new one.

References

[edit]
  1. ^ "The Frisco Park Steam Engine". City of Amory, Mississippi. Retrieved February 8, 2020.
  2. ^ a b Stagner (1976), p. 36.
  3. ^ a b c "Frisco 1522 Unofficial Web Site". www.frisco1522.org. Retrieved 2021-11-15.
  4. ^ "SLSF 1522 Tutorial – SteamCentral". www.steamcentral.com. Retrieved 2021-11-15.
  5. ^ "Who was engineer on 1522 Grand Farewell?". Frisco.org – St. Louis-San Francisco Railway. Retrieved 2021-11-15.
  6. ^ "Frisco 1522 Historical Web Site". www.stlouisnrhs.org. Retrieved 2021-11-15.

Further reading

[edit]
[edit]