UTVA Aero 3

Aero 3
General information
TypeMilitary trainer
National originYugoslavia
ManufacturerUTVA
Primary userYugoslavia
Number built110
History
Introduction date1958
First flightAugust 1956

The UTVA Aero 3 was a piston-engined military trainer aircraft built in Yugoslavia to replace the Ikarus Aero 2 then in service. One hundred ten were built, in Yugoslav Air Force service from 1958 to mid-1970s.[1] It was superseded by the UTVA 75.

First May 1960 in Ljubljana Aero 2 and Aero 3 aircraft

Design and development

[edit]

First flown in 1956,[2] the Aero 3 was designed to meet a Yugoslav Air Force requirement for a primary trainer that could also be used in the army co-operation role.[2]

The Aero 3 was a low-wing cantilever monoplane that seated the student and instructor in tandem under a bubble canopy.[2] Of all wood construction, it had a fixed, tailwheel landing gear and was powered by a nose-mounted 190 hp (142 kW) Lycoming O-435-A piston engine.[2]

Former military operators

[edit]

Aircraft on display

[edit]
Serbia

A UTVA Aero 3 prototype and UTVa Aero 3 are on display [1]

Specifications

[edit]

Data from [2]

General characteristics

  • Crew: 2 a teacher and student
  • Capacity: 2
  • Length: 8.58 m (28 ft 1 in)
  • Wingspan: 10.5 m (34 ft 5 in)
  • Height: 2.7 m (8 ft 10 in)
  • Wing area: 18.9 m2 (203 sq ft)
  • Gross weight: 1,198 kg (2,646 lb)
  • Powerplant: 1 × Lycoming O-435-A piston engine , 142 kW (190 hp)

Performance

  • Maximum speed: 230 km/h (143 mph, 124 kn)
  • Cruise speed: 180 km/h (112 mph, 97 kn)
  • Range: 680 km (422 mi, 367 nmi)
  • Service ceiling: 4,300 m (14,100 ft)

See also

[edit]

Aircraft of comparable role, configuration, and era

References

[edit]

Notes

[edit]
  1. ^ Ugolok Neba
  2. ^ a b c d e Orbis 1985, page 36

Bibliography

[edit]
  • The Illustrated Encyclopedia of Aircraft (Part Work 1982–1985). Orbis Publishing.
[edit]