Water crane
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/df/Signals_at_Horsted_Keynes_station_-_geograph.org.uk_-_1395107.jpg/220px-Signals_at_Horsted_Keynes_station_-_geograph.org.uk_-_1395107.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2e/Water_crane_Kladno_CZ_01.jpg/220px-Water_crane_Kladno_CZ_01.jpg)
A water crane is a device used for delivering a large volume of water into the tank or tender of a steam locomotive.[1][2][3] The device is also called a water column in the United States and Australia.[4] As a steam locomotive consumes large quantities of water, water cranes were a vital part of railway station equipment, often situated at the end of a platform, so that water could be refilled during a stop at the station.
Overview
[edit]Generally, water cranes consist of an upright steel pipe about 8 to 12 inches (0.20 to 0.30 m) in diameter with a horizontal, pivoting pipe connected to its upper end so as to form a swinging arm.[5] The swinging arm is usually designed to rest parallel to the rails when not in use.[6] Water cranes may be able to deliver up to ten cubic metres (2,600 US gallons) of water per minute.
Water supply
[edit]In hilly country, natural streams can be dammed and water fed by gravity to the water crane.[7] In flatter country this arrangement is not always possible, so water may be supplied by a tank next to the crane. Water tanks may vary in volume from 190 cubic metres (50,000 US gal) to greater than 757 cubic metres (200,000 US gal).[5] In some cases a well may be used to supply the water to the tank.[8]
Depending on the quality of the water under supply, it may need to be treated chemically to eliminate hardness which induces scale buildup on the inside of the locomotive boiler.[5] The scale which builds up on heat transfer surfaces forms a layer of insulation between the metal of the firebox and the boiler water.[9] This causes metal to overheat or corrode and eventually fail.
See also
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Water stop
- Track pan (US) (water trough (UK))
References
[edit]- ^ US patent 709376, John W. Thomas, Jr., "Stand-pipe for railway uses", issued 1902-09-16
- ^ US patent 847494, James F. Murphy, "Railway stand-pipe", issued 1907-03-19
- ^ US patent 958504, Patrick Henry Knight, "Stand-pipe for railway water-supply", issued 1910-05-17
- ^ Railway and Locomotive Historical Society, Marietta, GA (2008). "The Railroad Station Water Column." Railway and Locomotive Historical Society Quarterly, Vol. 28, No. 4 - Vol. 29, No 1. p.6.
- ^ a b c Tratman, Edward Ernest Russell (1901). "Chapter 11. Water and Coaling Stations and Other Track Accessories". Railway Track and Track Work (2nd ed.). New York, New York: Engineering News Publishing Company. OCLC 2030207.
- ^ Webb, Walter Loring (1917). Railroad Construction, Theory and Practice (6th ed.). New York, New York: John Wiley & Sons, Inc. pp. 376–377.
- ^ Cleemann, Thomas M. (1880). The Railroad Engineer's Practice. New York, New York: George H. Frost, Publisher. pp. 71–73. OCLC 70728043.
- ^ Guppy, B. W. (January–December 1919). "A Technical Description of the British Light Railways in France". Professional Memoirs of the Corps of Engineers, United States Army, and the Engineer Department at Large. 11: 185–216.
- ^ Wrinn, Jim (January 2012). "What's in the water?". Trains. Waukesha, Wisconsin: Kalmbach Publishing Company: 64. ISSN 0041-0934. OCLC 1642109.