Indium phosphide

Indium phosphide
Names
Other names
Indium(III) phosphide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.040.856 Edit this at Wikidata
UNII
  • InChI=1S/In.P checkY
    Key: GPXJNWSHGFTCBW-UHFFFAOYSA-N checkY
  • InChI=1/In.P/rInP/c1-2
    Key: GPXJNWSHGFTCBW-HIYQQWJCAF
  • [In+3].[P-3]
  • [In]#P
Properties
InP
Molar mass 145.792 g/mol
Appearance black cubic crystals[1]
Density 4.81 g/cm3, solid[1]
Melting point 1,062 °C (1,944 °F; 1,335 K)[1]
Solubility slightly soluble in acids
Band gap 1.344 eV (300 K; direct)
Electron mobility 5400 cm2/(V·s) (300 K)
Thermal conductivity 0.68 W/(cm·K) (300 K)
3.1 (infrared);
3.55 (632.8 nm)[2]
Structure
Zinc blende
a = 5.8687 Å [3]
Tetrahedral
Thermochemistry[4]
45.4 J/(mol·K)
59.8 J/(mol·K)
-88.7 kJ/mol
-77.0 kJ/mol
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Toxic, hydrolysis to phosphine
Safety data sheet (SDS) External MSDS
Related compounds
Other anions
Indium nitride
Indium arsenide
Indium antimonide
Other cations
Aluminium phosphide
Gallium phosphide
Related compounds
Indium gallium phosphide
Aluminium gallium indium phosphide
Gallium indium arsenide antimonide phosphide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Indium phosphide (InP) is a binary semiconductor composed of indium and phosphorus. It has a face-centered cubic ("zincblende") crystal structure, identical to that of GaAs and most of the III-V semiconductors.

Manufacturing

[edit]
Indium phosphide nanocrystalline surface obtained by electrochemical etching and viewed under scanning electron microscope. Artificially colored in image post-processing.

Indium phosphide can be prepared from the reaction of white phosphorus and indium iodide at 400 °C.,[5] also by direct combination of the purified elements at high temperature and pressure, or by thermal decomposition of a mixture of a trialkyl indium compound and phosphine.[6]

Applications

[edit]

The application fields of InP splits up into three main areas. It is used as the basis for optoelectronic components,[7] high-speed electronics,[8] and photovoltaics[9]

High-speed optoelectronics

[edit]

InP is used as a substrate for epitaxial optoelectronic devices based other semiconductors, such as indium gallium arsenide. The devices include pseudomorphic heterojunction bipolar transistors that could operate at 604 GHz.[10]

InP itself has a direct bandgap, making it useful for optoelectronics devices like laser diodes and photonic integrated circuits for the optical telecommunications industry, to enable wavelength-division multiplexing applications.[11] It is used in high-power and high-frequency electronics because of its superior electron velocity with respect to the more common semiconductors silicon and gallium arsenide.

Optical Communications

[edit]

InP is used in lasers, sensitive photodetectors and modulators in the wavelength window typically used for telecommunications, i.e., 1550 nm wavelengths, as it is a direct bandgap III-V compound semiconductor material. The wavelength between about 1510 nm and 1600 nm has the lowest attenuation available on optical fibre (about 0.2 dB/km).[12] Further, O-band and C-band wavelengths supported by InP facilitate single-mode operation, reducing effects of intermodal dispersion.

Photovoltaics and optical sensing

[edit]

InP can be used in photonic integrated circuits that can generate, amplify, control and detect laser light.[13]

Optical sensing applications of InP include

  • Air pollution control by real-time detection of gases (CO, CO2, NOX [or NO + NO2], etc.).
  • Quick verification of traces of toxic substances in gases and liquids, including tap water, or surface contaminations.
  • Spectroscopy for non-destructive control of product, such as food. Researchers of Eindhoven University of Technology and MantiSpectra have already demonstrated the application of an integrated near-infrared spectral sensor for milk.[14] In addition, it has been proven that this technology can also be applied to plastics and illicit drugs.[15]

References

[edit]
  1. ^ a b c Haynes, p. 4.66
  2. ^ Sheng Chao, Tien; Lee, Chung Len; Lei, Tan Fu (1993), "The refractive index of InP and its oxide measured by multiple-angle incident ellipsometry", Journal of Materials Science Letters, 12 (10): 721, doi:10.1007/BF00626698, S2CID 137171633.
  3. ^ "Basic Parameters of InP". Ioffe Institute, Russia.
  4. ^ Haynes, p. 5.23
  5. ^ Indium Phosphide at HSDB. U.S. National Institute of Health
  6. ^ InP manufacture. U.S. National Institute of Health
  7. ^ "Optoelectronic devices and components – Latest research and news | Nature". www.nature.com. Retrieved 2022-02-22.
  8. ^ "High Speed Electronics". www.semiconductoronline.com. Retrieved 2022-02-22.
  9. ^ "Photovoltaics". SEIA. Retrieved 2022-02-22.
  10. ^ Indium Phosphide and Indium Gallium Arsenide Help Break 600 Gigahertz Speed Barrier. Azom. April 2005
  11. ^ The Light Brigade appeared in Red Herring in 2002. Archived June 7, 2011, at the Wayback Machine
  12. ^ D’Agostino, Domenico; Carnicella, Giuseppe; Ciminelli, Caterina; Thijs, Peter; Veldhoven, Petrus J.; Ambrosius, Huub; Smit, Meint (2015-09-21). "Low-loss passive waveguides in a generic InP foundry process via local diffusion of zinc". Optics Express. 23 (19): 25143–25157. Bibcode:2015OExpr..2325143D. doi:10.1364/OE.23.025143. PMID 26406713.
  13. ^ Osgood, Richard Jr. (2021). Principles of photonic integrated circuits : materials, device physics, guided wave design. Xiang Meng. Springer. ISBN 978-3-030-65193-0. OCLC 1252762727.
  14. ^ Hakkel, Kaylee D.; Petruzzella, Maurangelo; Ou, Fang; van Klinken, Anne; Pagliano, Francesco; Liu, Tianran; van Veldhoven, Rene P. J.; Fiore, Andrea (2022-01-10). "Integrated near-infrared spectral sensing". Nature Communications. 13 (1): 103. Bibcode:2022NatCo..13..103H. doi:10.1038/s41467-021-27662-1. PMC 8748443. PMID 35013200.
  15. ^ Kranenburg, Ruben F.; Ou, Fang; Sevo, Petar; Petruzzella, Maurangelo; de Ridder, Renee; van Klinken, Anne; Hakkel, Kaylee D.; van Elst, Don M. J.; van Veldhoven, René; Pagliano, Francesco; van Asten, Arian C.; Fiore, Andrea (2022-08-01). "On-site illicit-drug detection with an integrated near-infrared spectral sensor: A proof of concept". Talanta. 245: 123441. doi:10.1016/j.talanta.2022.123441. PMID 35405444. S2CID 247986674.

Cited sources

[edit]
[edit]