Manufacture of the International Space Station
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7f/MPLM_inside_the_SSPF.jpg/270px-MPLM_inside_the_SSPF.jpg)
The project to create the International Space Station required the utilization and/or construction of new and existing manufacturing facilities around the world, mostly in the United States and Europe. The agencies overseeing the manufacturing involved NASA, Roscosmos, the European Space Agency, JAXA, and the Canadian Space Agency. Hundreds of contractors[1] working for the five space agencies were assigned the task of fabricating the modules, trusses, experiments and other hardware elements for the station.
The fact that the project involved the co-operation of sixteen countries working together created engineering challenges that had to be overcome: most notably the differences in language, culture and politics, but also engineering processes, management, measuring standards and communication; to ensure that all elements connect together and function according to plan. The ISS agreement program also called for the station components to be made highly durable and versatile — as it is intended to be used by astronauts indefinitely. A series of new engineering and manufacturing processes and equipment were developed, and shipments of steel, aluminium alloys and other materials were needed for the construction of the space station components.
History and planning
[edit]The project began as Space Station Freedom, a US only effort, but was long delayed by funding and technical problems. Following the initial 1980's authorization (with an intended ten year construction period) by Ronald Reagan, the Station Freedom concept was designed and renamed in the 1990s to reduce costs and expand international involvement. In 1993, the United States and Russia agreed to merge their separate space station plans into a single facility integrating their respective modules and incorporating contributions from the European Space Agency and Japan.[2] In later months, an international agreement board recruited several more space agencies and companies to collaborate to the project. The International Organization for Standardization played a crucial role in unifying and overcoming different engineering methods (such as measurements and units), languages, standards and techniques to ensure quality, engineering communication and logistical management across all manufacturing activities of the station components.[citation needed]
Engineering designs
[edit]Engineering diagrams of various elements of the ISS, with annotations of various parts and systems on each module.
Technical schematics
[edit]- Technical blueprint of components
- Exploded view of truss sections
- Z1 Truss design
- S0 Truss design
- P1 / S1 Truss design
- P3/4 / S3/4 Truss design
- P5 / S5 Truss design
- P6 / S6 Truss design
- Radiator panels
- External Stowage Platform 1
- Destiny lab
- Quest airlock (plan view)
- Quest airlock (isometric view)
- Node 1
- Node 2
- Cupola
- Columbus
- Pirs
- Poisk
- Rassvet
- Japanese Experiment Module
- Typical ISS rack
- Pressurized Mating Adapters
- Zvezda Service Module
- Zarya FGB
Manufacturing Information and Processes
[edit]List of factories and manufacturing processes used in the construction and fabrication of the International Space Station modular components:[citation needed]
Decommissioned Components are shown in gray.
Transportation
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/90/Airbus_%28A300-600ST%29_Beluga_unloading_Columbus.jpg/220px-Airbus_%28A300-600ST%29_Beluga_unloading_Columbus.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c0/Issnode-VAB-medium.jpg/220px-Issnode-VAB-medium.jpg)
Once manufactured or fabricated sufficiently, most of the space station elements were transported by aircraft (usually the Airbus Beluga or the Antonov An-124) to the Kennedy Space Center Space Station Processing Facility for final manufacturing stages, checks and launch processing. Some elements arrived by ship at Port Canaveral.[23][24]
Each module for aircraft transport was safely housed in a custom-designed shipping container with foam insulation and an outer shell of sheet metal, to protect it from damage and the elements. At their respective European, Russian and Japanese factories, the modules were transported to their nearest airport by road in their containers, loaded into the cargo aircraft and were flown to Kennedy Space Center's Shuttle Landing Facility for unloading and final transfers to the SSPF and or the Operations and Checkout Building in the KSC industrial area. The American and Canadian-built components such as the US lab, Node 1, Quest airlock, truss and solar array segments, and the Canadarm-2 were either flown by the Aero Spacelines Super Guppy to KSC, or transported by road and rail.[25]
After final stages of manufacturing, systems testing and launch checkout, all ISS components are loaded into a payload transfer container in the shape of the Space Shuttle payload bay. This container safely carries the component in its launch configuration until it is hoisted vertically at the launch pad gantry for transfer to the Space Shuttle orbiter for launch and in-orbit assembly of the International Space Station.[26]
- Columbus entering the SSPF loading yard for launch processing
- Airbus Beluga loading
- Unloading the Columbus module in its container at the shuttle landing facility
- Transportation container
- Antonov An-124 arrives at KSC with the Kibo module from the Tanegashima Space Center in Japan
- The Rassvet module in its container at KSC being unloaded from the Antonov 124 inbound from Khrunichev
- Node 3 being hoisted by cranes before loading onto truck
- ISS payload transfer container
- The US laboratory module being moved vertically from the payload transfer container to the Space Shuttle orbiter inside its installation structure
Pre-launch processing and last stages of manufacturing
[edit]With the exception of all but one Russian-built module — Rassvet, all ISS components end up here at either one or both of these buildings at Kennedy Space Center.
Space Station Processing Facility
[edit]At the SSPF, ISS modules, trusses and solar arrays are prepped and made ready for launch. In this iconic building are two large 100,000 class clean work environment areas.[27] Workers and engineers wear full non-contaminant clothing while working. Modules receive cleaning and polishing, and some areas are temporarily disassembled for the installation of cables, electrical systems and plumbing. Steel truss parts and module panels are assembled together with screws, bolts and connectors, some with insulation. In another area, shipments of spare materials are available for installation. International Standard Payload Rack frames are assembled and welded together, allowing the installation of instruments, machines and science experiment boxes to be fitted. Once racks are fully assembled, they are hoisted by a special manually operated robotic crane and carefully maneuvered into place inside the space station modules. Each rack weighs from 700 to 1,100 kg, and connect inside the module on special mounts with screws and latches.[28]
Cargo bags for MPLM modules were filled with their cargo such as food packages, science experiments and other miscellaneous items on-site in the SSPF, and were loaded into the module by the same robotic crane and strapped in securely.
- Overview of the SSPF factory floor filled with space station modules
- ExPRESS logistics carrier assembly
- Workers in protective clothing inspect and clean the interior of Node 3
- ISPR rack configuration in a typical module
- Robotic crane arm loading cargo bags in an MPLM
- Workers fitting and inspecting the rack mounts
- Workers loading rack covers
- Leonardo MPLM in its housing jig
- Checking and testing the antenna
- Columbus being hoisted to a manufacturing weigh stand
- A rack being fitted in the Destiny laboratory
- A worker assembles parts for the Japanese Experiment Module and its robotic arm
Operations and Checkout Building
[edit]Adjacent to the Space Station Processing Facility, the Operations and Checkout Building's spacecraft workshop is used for testing of the space station modules in a vacuum chamber to check for leaks which can be repaired on-site. Additionally, systems checking on various electrical elements and machines is conducted. Similar processing operations to the SSPF are conducted in this building if the SSPF area is full, or certain stages of preparation can only be done in the O&C.[29]
- Quest airlock arriving at KSC on its way to the O&C building
- US lab
- US lab unloaded from its container
- US lab loading into vacuum chamber for testing
- Overhead crane hoisting the US lab
- S0 Truss
See also
[edit]- Assembly of the International Space Station
- Origins of the International Space Station
- Space architecture
- Aerospace engineering
- Space manufacturing
- Space Station 3D – 2002 Canadian documentary
References
[edit]- ^ "Companies involved with ISS".
- ^ "International Space Station | Facts, Missions, & History".
- ^ Wade, Mark (15 July 2008). "ISS Zarya". Encyclopaedia Astronautica. Archived from the original on 27 February 2009. Retrieved 2009-03-11.
- ^ "Unity Connecting Module: Cornerstone for a Home in Orbit" (PDF). NASA. January 1999. Archived from the original (PDF) on 17 March 2009. Retrieved 2009-03-11.
- ^ "Zvezda Service Module". NASA. 11 March 2009. Archived from the original on 23 March 2009. Retrieved 2009-03-11.
- ^ "US Destiny Laboratory". NASA. 26 March 2007. Archived from the original on 9 July 2007. Retrieved 2007-06-26.
- ^ NASA.gov Techs_working_on_ELC_1019.jpg
- ^ "Space Station Extravehicular Activity". NASA. 4 April 2004. Archived from the original on 3 April 2009. Retrieved 2009-03-11.
- ^ "Space Station Assembly: Integrated Truss Structure". NASA. Archived from the original on 7 December 2007. Retrieved 2007-12-02.
- ^ "P3 and P4 to expand station capabilities, providing a third and fourth solar array" (PDF). Boeing. July 2006. Retrieved 2007-12-02.
- ^ "STS-118 MISSION OVERVIEW: BUILD THE STATION…BUILD THE FUTURE" (PDF). NASA PAO. July 2007. Archived (PDF) from the original on 1 December 2007. Retrieved 2007-12-02.
- ^ "Columbus laboratory". ESA. 10 January 2009. Archived from the original on 30 March 2009. Retrieved 2009-03-06.
- ^ "Stainless Steel, orbiting our planet at 17,150 miles per hour".
- ^ "About Kibo". JAXA. 25 September 2008. Archived from the original on 10 March 2009. Retrieved 2009-03-06.
- ^ "Kibo Japanese Experiment Module". NASA. 23 November 2007. Archived from the original on 23 October 2008. Retrieved 2008-11-22.
- ^ Zak, Anatoly. "Docking Compartment-1 and 2". RussianSpaceWeb.com. Archived from the original on 10 February 2009. Retrieved 26 March 2009.
- ^ Bergin, Chris (9 November 2009). "Russian module launches via Soyuz for Thursday ISS docking". NASASpaceflight.com. Archived from the original on 13 November 2009. Retrieved 10 November 2009.
- ^ "NASA Extends Contract With Russia's Federal Space Agency" (Press release). NASA. 9 April 2007. Archived from the original on 23 June 2007. Retrieved 2007-06-15.
- ^ "NASA to Test Bigelow Expandable Module on Space Station". NASA. 16 January 2013. Retrieved 16 January 2013.
- ^ NASA.gov New Expandable Addition on Space Station to Gather Critical Data for Future Space Habitat Systems 2015
- ^ "Thales Alenia Space Joins NanoRacks on Commercial ISS Airlock Module". 5 February 2018.
- ^ "FGB-based Multipurpose Lab Module (MLM)". Khrunichev State Research and Production Space Centre. Archived from the original on 27 September 2007. Retrieved 2008-10-31.
- ^ NASA.gov
- ^ NASA.gov
- ^ mediaarchive.ksc.nasa.gov/detail.cfm?mediaid=44772
- ^ mediaarchive.ksc.nasa.gov/detail.cfm?mediaid=44912
- ^ NASA.gov
- ^ mediaarchive.ksc.nasa.gov/detail.cfm?mediaid=51708
- ^ NASA.gov
External links
[edit]ISS space agency websites
[edit]Canadian Space Agency
European Space Agency
Centre national d'études spatiales (National Centre for Space Studies)
German Aerospace Center
Italian Space Agency
Japan Aerospace Exploration Agency
Russian Federal Space Agency
National Aeronautics and Space Administration
Manufacturer websites
[edit]S.P. Korolev Rocket and Space Corporation Energia
Boeing - International Space Station
Lockheed Martin Space Systems
Thales Alenia Group
Thales Aerospace UK
BSM group (stainless steel supplier)
MDA Space Missions
Institute of Space and Astronautical Science
Brazilian Space Agency
Bigelow Aerospace
Airbus space industries